Thustmaster Ferrari 458 Spider Racing Wheel Gas Break Pedal Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          20 minutes            

Sections

1

• Gas/Break Pedal
• 4 steps

Flags

0

• BackThrustmaster Ferrari 458 Spider Racing Wheel

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Gas/Break Pedal               

• Start by removing both pedals. Remove the two black 20mm screws on each pedal using a PH2 Phillips head screw driver.
• In the picture you see a plastic opening tool instead of screw driver because we did not have our screw driver when we were taking the picture.

Start by removing both pedals. Remove the two black 20mm screws on each pedal using a PH2 Phillips head screw driver.

In the picture you see a plastic opening tool instead of screw driver because we did not have our screw driver when we were taking the picture.

1024

Step 2

• Remove the 10mm long black screws on the back of the base using a PH2 Phillips head screw driver. There are 13 screws total.
• Gently lift cover out to access inside.
• There is a screw behind the cable.
• In the picture you see a plastic opining tool instead of screw driver because we did not have our screw driver when we were taking the picture.

Remove the 10mm long black screws on the back of the base using a PH2 Phillips head screw driver. There are 13 screws total.

Gently lift cover out to access inside.

There is a screw behind the cable.

In the picture you see a plastic opining tool instead of screw driver because we did not have our screw driver when we were taking the picture.

Step 3

• Push the pin that holds the pedal out from middle outward.
• There are two springs that hold the pedal upward. Make sure the pin goes through the springs and the pedal when installing new pedal.

Push the pin that holds the pedal out from middle outward.

There are two springs that hold the pedal upward. Make sure the pin goes through the springs and the pedal when installing new pedal.

Step 4

• Install the new pedal with springs and pin and make sure that the pin holds them together.
• Add a little grease on pin when installing the new pedal.
• Repeat steps in reverse to reassemble device.
• Wash your hands after you finish dealing with grease. it is a dangerous material will cause problems if it gets in your eyes or get swallowed.

Install the new pedal with springs and pin and make sure that the pin holds them together.

Add a little grease on pin when installing the new pedal.

Repeat steps in reverse to reassemble device.

Wash your hands after you finish dealing with grease. it is a dangerous material will cause problems if it gets in your eyes or get swallowed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Mario Nunez                     

Member since: 10/18/2017

403 Reputation

                                      3 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team S1-G33, Cagle Fall 2017                        

                                                  Member of USF Tampa, Team S1-G33, Cagle Fall 2017 



                    USFT-CAGLE-F17S1G33                     


                                            4 Members                     


                                            5 Guides authored                     

Alex Ruiz - Feb 18, 2020

Reply

Hi, where can you get replacement springs? Cannot find anything online that sells this specific diameter and angle at both ends? Can I contact Thrustmaster to get more springs or a replacement pedal set?

Maxime Viens - Apr 15, 2020

I am also looking for this spring. Any help would be appreciated.

thanks

Jay Nicholson - Dec 15, 2021

Reply

Me too. Are these springs available?

marco_fintelman - Jul 9, 2022

Reply

Hi,

You can fint the springs here.

https://simracewebshop.com/product-categ…

fnaf master101 - Sep 25, 2022

Reply

I only need 1 spring, not 10….

Anyone selling 1 spring?