Difficulty

Easy

Steps

4

Time Required

                          5 minutes

Sections

2

  • Back Cover
  • 2 steps
  • Battery
  • 2 steps

Flags

1

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackTexas Instruments TI-36X Pro

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Remove the calculator’s protective cover.
  • Place the calculator face down.

Remove the calculator’s protective cover.

Place the calculator face down.

1024

Step 2

  • Using a Phillips #1 screwdriver, remove the six 6mm screws from the back of the case and place them to the side.
  • Start from the notches on the top edge and use your fingers or a prying tool to carefully pry the back cover from the calculator.

Using a Phillips #1 screwdriver, remove the six 6mm screws from the back of the case and place them to the side.

Start from the notches on the top edge and use your fingers or a prying tool to carefully pry the back cover from the calculator.

Step 3

              Battery
  • Use a Phillips #00 screwdriver to remove the two 7.5 mm screws holding the battery cover to the case.
  • Remove the battery cover without disconnecting either end of the blue wire.
  • Use your finger to move the battery cover to the side.

Use a Phillips #00 screwdriver to remove the two 7.5 mm screws holding the battery cover to the case.

Remove the battery cover without disconnecting either end of the blue wire.

Use your finger to move the battery cover to the side.

Step 4

  • Use the flat side of a spudger to remove the battery by lifting the bottom edge.
  • When inserting a new battery, check the polarity (+ or -) and insert the new battery with the + side on top.

Use the flat side of a spudger to remove the battery by lifting the bottom edge.

When inserting a new battery, check the polarity (+ or -) and insert the new battery with the + side on top.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.

Author

                                      with 6 other contributors 


                    Robert Sekerak

Member since: 04/25/2014

560 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 11-52, Amido Spring 2014                        

                                                  Member of Cal Poly, Team 11-52, Amido Spring 2014 



                    CPSU-AMIDO-S14S11G52                     


                                            4 Members                     


                                            10 Guides authored

frogman896 - Oct 8, 2020

Reply

Interesting that the cr2032 battery is not rechargeable, so is the solar panel real? Or does it bypass the battery and use the solar panel in lighted situations?

Jacob Ertel - Jan 27, 2021

The guide should specify that the CR2032 needs to be rechargeable. They are readily available at a popular online shopping website. I was skeptical that the solar was real too, because of the frosted plastic placed over it. Based on the pictures in this teardown, and another video showing a red LED in the solar circuit, I conclude that the solar charging circuit is real.