Tivax Mitraveler 10Q 8 Rear Case Replacement Repair Guide

Difficulty

Very easy

Steps

6

Time Required

                          1 - 2 minutes            

Sections

1

• Rear Case
• 6 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackTivax MiTraveler 10Q-8

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Case               

• With the device face down, slide the charging port cover off on the left side of device.

With the device face down, slide the charging port cover off on the left side of device.

1024

Step 2

• A phillips 2.88mm screw will be seen at the charging port.

A phillips 2.88mm screw will be seen at the charging port.

Step 3

• Use a PH000 Philips head screwdriver to remove screw.
• Remember lefty loosey, righty tighty

Use a PH000 Philips head screwdriver to remove screw.

Remember lefty loosey, righty tighty

Step 4

• Use the plastic opening tool between the back plate and front plate to pry the back plate off; start at the headphone jack.
• Make sure the lip of the plastic opening tool is face up.

Use the plastic opening tool between the back plate and front plate to pry the back plate off; start at the headphone jack.

Make sure the lip of the plastic opening tool is face up.

Step 5

• Move around the device with the plastic opening tool pushing down to release the back plate from clips.
• You will hear popping sounds when you work around the device.

Move around the device with the plastic opening tool pushing down to release the back plate from clips.

You will hear popping sounds when you work around the device.

Step 6

• Once you’ve moved around the whole device with the plastic opening tool, the back plate will completely release from the rest of the device.

Once you’ve moved around the whole device with the plastic opening tool, the back plate will completely release from the rest of the device.

To reassemble your device, simply slide the back plate back in to place and press down until you hear several clicks.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Maria                     

Member since: 03/16/2015

210 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Colorado Springs, Team 4-3, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 4-3, Panko Spring 2015 



                    UCCS-PANKO-S15S4G3                     


                                            3 Members                     


                                            10 Guides authored