Difficulty
Very easy
Steps
6
Time Required
2 minutes
Sections
2
- Removal of TiVo Series 2 TCD540080 Case
- 3 steps
- Cooling Fan
- 3 steps
Flags
0
BackTiVo Series 2 TCD540080
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Removal of TiVo Series 2 TCD540080 Case
- Power down the TiVo and detach the power cable from the rear of the unit.
- Wait 5 minutes for the unit to fully discharge before proceeding to the next step.
Power down the TiVo and detach the power cable from the rear of the unit.
Wait 5 minutes for the unit to fully discharge before proceeding to the next step.
1024
Step 2
- Remove the five T10 screws from the rear of the case using the Torx screwdriver.
Remove the five T10 screws from the rear of the case using the Torx screwdriver.
Step 3
- Lift up and pull back the outer casing towards the rear of the unit.
Lift up and pull back the outer casing towards the rear of the unit.
Step 4
Cooling Fan
- The fan is held in by four T15 screws on the rear of the device.
The fan is held in by four T15 screws on the rear of the device.
Step 5
- Take the wound red and black wires coming from the fan and follow them back to the logic board.
- Unplug the connector from the motherboard.
Take the wound red and black wires coming from the fan and follow them back to the logic board.
Unplug the connector from the motherboard.
Step 6
- Pull the fan towards the front and out of the TiVo unit.
Pull the fan towards the front and out of the TiVo unit.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Svyatoslav Markeyev
Member since: 04/16/2010
135 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 33-79, Johann Spring 2010
Member of Cal Poly, Team 33-79, Johann Spring 2010
CPSU-JOHANN-S10S33G79
4 Members
5 Guides authored
