Difficulty

Easy

Steps

21

Time Required

                          10 - 15 minutes

Sections

1

  • Tomado Rechargeable Vacuum Cleaner Disassembly
  • 21 steps

Flags

0

  • BackTomado Rechargeable Vacuum Cleaner

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Tomado Rechargeable Vacuum Cleaner Disassembly
  • The full product in its original state.

The full product in its original state.

1024

Step 2

  • Remove the nozzle by pressing the white button on the top of the product just under the name of the brand.

Remove the nozzle by pressing the white button on the top of the product just under the name of the brand.

Step 3

  • Remove the big parts that are inside of the nozzle. These parts consist of a plastic structure with a filter.

Remove the big parts that are inside of the nozzle. These parts consist of a plastic structure with a filter.

Step 4

  • Remove the rubber fitting from the inside of the nozzle by pulling it from the metal pieces.

Remove the rubber fitting from the inside of the nozzle by pulling it from the metal pieces.

Step 5

  • Remove the blue switchbutton from the upper part of the nozzle by putting a momentum on the edge. After you have this signature move you can remove the brush. You can see the video for the signature move.

Remove the blue switchbutton from the upper part of the nozzle by putting a momentum on the edge. After you have this signature move you can remove the brush. You can see the video for the signature move.

Step 6

  • Remove the blue switchbutton from the upper part of the nozzle by putting a momentum on the edge. After you have done this signature move you can remove the brush.

Remove the blue switchbutton from the upper part of the nozzle by putting a momentum on the edge. After you have done this signature move you can remove the brush.

Step 7

  • Right now the whole nozzle is disassembled, except for two small steel rings. These will break if you try to remove them.

Right now the whole nozzle is disassembled, except for two small steel rings. These will break if you try to remove them.

Step 8

  • Now the nozzle is disassembled we can start with the body.

Now the nozzle is disassembled we can start with the body.

Step 9

  • Remove 4 screws on the side and 1 screw on the bottom. You’ll do this by crosshead screwdriver size number 1.

Remove 4 screws on the side and 1 screw on the bottom. You’ll do this by crosshead screwdriver size number 1.

Step 10

  • Remove the black clip from the inner top side of the body.

Remove the black clip from the inner top side of the body.

Step 11

  • Remove the lid from the battery lid by sliding it and after pull it out.

Remove the lid from the battery lid by sliding it and after pull it out.

Step 12

  • Remove the screw after removing the lid above the battery.

Remove the screw after removing the lid above the battery.

Step 13

  • Seperate the two body parts.

Seperate the two body parts.

Step 14

  • Remove the turbine protector in front of the turbine.

Remove the turbine protector in front of the turbine.

Step 15

  • Pull the battery out. It still has some wires attached to it.

Pull the battery out. It still has some wires attached to it.

Step 16

  • Use the pliers to remove the wires from the battery.

Use the pliers to remove the wires from the battery.

Step 17

  • Pull the charge socket out of the plastic cover.

Pull the charge socket out of the plastic cover.

Step 18

  • Remove the button from the body.

Remove the button from the body.

Step 19

  • Pull the button off the switch.

Pull the button off the switch.

Step 20

  • Remove the last screw with a number 1 screwdriver, next to the electro motor to release the motor + turbine.

Remove the last screw with a number 1 screwdriver, next to the electro motor to release the motor + turbine.

Step 21

  • The remaining part consists of moving pieces that cannot be disassembled.

The remaining part consists of moving pieces that cannot be disassembled.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Koen Tijhuis

Member since: 03/07/2018

313 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Delft University of Technology, Team S1-G8, Flipsen Winter 2018                        

                                                  Member of Delft University of Technology, Team S1-G8, Flipsen Winter 2018 



                    TUD-FLIPSEN-W18S1G8                     


                                            2 Members                     


                                            1 Guide authored