Difficulty

Moderate

Steps

12

Time Required

                          20 minutes

Sections

3

  • TomTom GO 500 Opening the Device
  • 5 steps
  • Motherboard
  • 4 steps
  • Speaker
  • 3 steps

Flags

0

  • BackTomTom GO 500

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              TomTom GO 500 Opening the Device
  • Unscrew the two 3mm screws at the base of the device using the Torx T5 screwdriver.

Unscrew the two 3mm screws at the base of the device using the Torx T5 screwdriver.

1024

Step 2

  • Using the plastic opening tools, insert one opening tool into the gap between the screen casing and the motherboard casing. Then insert the other tool into one of the adjacent sides and slide it around the top.
  • There are 14 latches that need to be undone.
  • The latches break easily during the opening process so we recommend purchasing a new screen casing if they break.

Using the plastic opening tools, insert one opening tool into the gap between the screen casing and the motherboard casing. Then insert the other tool into one of the adjacent sides and slide it around the top.

There are 14 latches that need to be undone.

The latches break easily during the opening process so we recommend purchasing a new screen casing if they break.

Step 3

  • With the screen casing unlatched, locate the right side where the two connectors are.

With the screen casing unlatched, locate the right side where the two connectors are.

Step 4

  • Unlatch the connectors using the plastic opening tool.
  • The orange rectangular connector may have come off in the process of removing the screen casing.

Unlatch the connectors using the plastic opening tool.

The orange rectangular connector may have come off in the process of removing the screen casing.

Step 5

  • Separate the screen casing from the motherboard casing.

Separate the screen casing from the motherboard casing.

Step 6

              Motherboard
  • Unscrew the five 4mm screws using the Phillips #0 screwdriver.

Unscrew the five 4mm screws using the Phillips #0 screwdriver.

Step 7

  • Unplug the connector shown near the center of the motherboard using the tweezers.

Unplug the connector shown near the center of the motherboard using the tweezers.

Step 8

  • Unplug the second connector using the plastic opening tool.

Unplug the second connector using the plastic opening tool.

Step 9

  • Remove the motherboard from the casing.

Remove the motherboard from the casing.

Step 10

              Speaker
  • The speaker is located next to the battery.

The speaker is located next to the battery.

Step 11

  • Pinch the speaker at the rubber grommets and tug gently.

Pinch the speaker at the rubber grommets and tug gently.

Step 12

  • Insert the new speaker in the rubber grommet. Use the plastic opening tool to wrap the grommet over the speaker.

Insert the new speaker in the rubber grommet. Use the plastic opening tool to wrap the grommet over the speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Nicholas Maharaj

Member since: 09/22/2016

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       UC Davis, Team 2-5, Oliver Fall 2016                        

                                                  Member of UC Davis, Team 2-5, Oliver Fall 2016 



                    UCD-OLIVER-F16S2G5                     


                                            5 Members                     


                                            9 Guides authored