Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
1
- Logic Board
- 4 steps
Flags
0
BackTomTom GO Live 1535M
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Screen
- Slip a small opening tool underneath the screen, gently sliding it around the outside edge.
- It may be easier to start at the corners.
Slip a small opening tool underneath the screen, gently sliding it around the outside edge.
It may be easier to start at the corners.
1024
Step 2
Cables
- Carefully remove the reset button cable (located on the left) and the ribbon cable.
- Remove the screen and set it aside.
Carefully remove the reset button cable (located on the left) and the ribbon cable.
Remove the screen and set it aside.
Step 3
Logic Board Cables
- Remove the logic board cables.
- We highly advice that a pair of tweezers are used for this step to ensure no part is damaged.
Remove the logic board cables.
We highly advice that a pair of tweezers are used for this step to ensure no part is damaged.
Step 4
Screws
- Remove the 3.6mm screws with a Phillips Screwdriver.
- After removing the screws simply lift the logic board from the base.
Remove the 3.6mm screws with a Phillips Screwdriver.
After removing the screws simply lift the logic board from the base.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 9 other contributors
Mathias Sagide
Member since: 01/20/2015
618 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
USF Tampa, Team 19-4, Blackwell Spring 2014
Member of USF Tampa, Team 19-4, Blackwell Spring 2014
USFT-BLACKWELL-S14S19G4
1 Member
5 Guides authored
