Difficulty

Moderate

Steps

7

Time Required

                          5 - 10 minutes

Sections

2

  • Back Panel
  • 4 steps
  • Power Button
  • 3 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackTomTom One XL

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Remove the 4 .4mm screws on the back of the device.

Remove the 4 .4mm screws on the back of the device.

1024

Step 2

  • Using the palate knife tool, pry the back from the LCD screen. Apply a moderate pressure to separate them.
  • You can rotate TOMTOM XL to make prying back off easier.
  • Be careful not to injure the two wires connecting the pieces.

Using the palate knife tool, pry the back from the LCD screen. Apply a moderate pressure to separate them.

You can rotate TOMTOM XL to make prying back off easier.

Be careful not to injure the two wires connecting the pieces.

Step 3

  • After prying both halves apart, they will be connected by two wires.
  • Carefully set the two halves next to each other making sure not to stress or damage the wires.

After prying both halves apart, they will be connected by two wires.

Carefully set the two halves next to each other making sure not to stress or damage the wires.

Step 4

  • Using the tweezers separate the wires connecting the battery and speaker to the mother board.
  • Be gentle while pulling the wires out, the plugs are easily injured.

Using the tweezers separate the wires connecting the battery and speaker to the mother board.

Be gentle while pulling the wires out, the plugs are easily injured.

Step 5

              Power Button
  • Using a Torx 6 screwdriver, remove the 4 .5mm screws connecting the motherboard to the screen assembly.
  • The motherboard is connected to the screen assembly via a ribbon wire. After removing the screws, be careful not to damage the wire or the port.

Using a Torx 6 screwdriver, remove the 4 .5mm screws connecting the motherboard to the screen assembly.

The motherboard is connected to the screen assembly via a ribbon wire. After removing the screws, be careful not to damage the wire or the port.

Step 6

  • Detach the ribbon wire from it’s port on the back of the motherboard.

Detach the ribbon wire from it’s port on the back of the motherboard.

Step 7

  • Now the power button is exposed and any obstructions can be easily removed.
  • If you want to replace the button it can easily be popped out using your hands.

Now the power button is exposed and any obstructions can be easily removed.

If you want to replace the button it can easily be popped out using your hands.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Jesse

Member since: 03/11/2015

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Colorado Springs, Team 9-6, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 9-6, Panko Spring 2015 



                    UCCS-PANKO-S15S9G6                     


                                            3 Members                     


                                            5 Guides authored