Tomtom Xxl 540 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          5 minutes            

Sections

1

• Screen
• 10 steps

Flags

4

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackTomTom XXL 540 Series

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Screen               

• Peel back the sticker, using the tweezers on the bottom of the device to reveal the two screws.

Peel back the sticker, using the tweezers on the bottom of the device to reveal the two screws.

1024

Step 2

• Unscrew the two T5 screws using the T5 Torx Screwdriver.

Unscrew the two T5 screws using the T5 Torx Screwdriver.

Step 3

• Insert the flat head screwdriver into the edge of the device. Using it as a lever, carefully pry the face-plate up.

Insert the flat head screwdriver into the edge of the device. Using it as a lever, carefully pry the face-plate up.

Step 4

• Carefully grab the ribbon cable with two fingers and pull the yellow ribbon cable upwards away from the motherboard.

Carefully grab the ribbon cable with two fingers and pull the yellow ribbon cable upwards away from the motherboard.

Step 5

• Remove the screen from of the face-plate.

Remove the screen from of the face-plate.

Step 6

• Insert the new screen into the face-plate.

Insert the new screen into the face-plate.

Step 7

• Reattach the yellow ribbon cable to the motherboard.

Reattach the yellow ribbon cable to the motherboard.

Step 8

• Using two hands, hold both ends of the device and snap the two plates together.

Using two hands, hold both ends of the device and snap the two plates together.

Step 9

• Re-insert the two T5 screws and tighten.

Re-insert the two T5 screws and tighten.

Step 10

• Re-apply the label edges back down to cover the screws.

Re-apply the label edges back down to cover the screws.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 7 other contributors 

                    Mike Sollars                     

Member since: 07/11/2013

507 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       WRI115, Team 1-1, Ruszkiewicz Spring 2013                        

                                                  Member of WRI115, Team 1-1, Ruszkiewicz Spring 2013 



                    WRI115-RUSZKIEWICZ-S13S1G1                     


                                            4 Members                     


                                            6 Guides authored                     

Shaun B - Nov 9, 2016

Reply

Hi! Thanks for doing this. How do I release the yellow cable from the board?