Toolcraft St 50D Solder Station Disassembly Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          5 minutes            

Sections

1

• Toolcraft ST-50D solder station Disassembly
• 6 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackToolcraft ST-50D solder station

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              So looks the solder station.               

• I think you can disassembly other models of Toolcraft ST solder stations 50/80/100 analog or digital the same way.

I think you can disassembly other models of Toolcraft ST solder stations 50/80/100 analog or digital the same way.

1024

Step 2

              Put the solder station on the back.               

• There are two holes with screws on the bottom side (green circles on the picture) and the 2-nd pair of screws is under the two rubbery “legs” (red circles).

There are two holes with screws on the bottom side (green circles on the picture) and the 2-nd pair of screws is under the two rubbery “legs” (red circles).

Step 3

              Unglue the two "legs"...               

• … by nails or by flat screwdriver and you will see the second pair of holes with screws.

… by nails or by flat screwdriver and you will see the second pair of holes with screws.

Step 4

              Unscrew the screws ...               

• … by Phillips #1 screwdriver and you can open the body of the solder station.

… by Phillips #1 screwdriver and you can open the body of the solder station.

Step 5

• The cables connected to switch: ON is Up , from inside: 1) RED + BLUE 2) BROWN

The cables connected to switch: ON is Up , from inside: 1) RED + BLUE 2) BROWN

Step 6

• From inside.

From inside.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Martin Kubica                     

Member since: 05/13/2016

784 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges                           

omanoman - Dec 11, 2019

Reply

Hi! Unfortunately, I have stupidly pulled off the contact sockets of the switch when disassembling my station. But I did not notice how they were originally connected. Could you please take a look and maybe take a picture of how the contacts are connected to the switch? I thank you in advance.

Martin Kubica - Dec 16, 2019

Reply

Hi.

So I added a picture of cables connected to the switch. ON position of the switch is Up, the cables are from inside of the solder station.

Martin Kubica

Michael Telatynski - Feb 13, 2020

Reply

Hello Martin, really appreciate your guide but do you have a photo of the back of the board with all the connections? I took it apart but did not take note of which connector the White, Blue and Red/Black wires went to. Its not clear on the photos above, would be hugely appreciated. Thanks!

Павел Vor - Oct 13, 2021

Reply

здравствуйте помагите найти на нее нагревательный элементяя даже не знаю какой должен быть спасибо