Difficulty
Easy
Steps
7
Time Required
5 - 10 minutes
Sections
3
- Casing
- 2 steps
- Wheel
- 2 steps
- Front Wheel Suspension
- 3 steps
Flags
0
BackTorque King Electric RTR RC Monster Truck
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Casing
- From the top view, remove each of the four pins that hold the casing in place.
From the top view, remove each of the four pins that hold the casing in place.
1024
Step 2
- Slowly pull the casing up to remove it.
Slowly pull the casing up to remove it.
Step 3
Removing Screws
- Using a Phillips 1 screwdriver, completely unscrew the 8mm screw located in the center of the wheel. Repeat this step for other wheels if needed.
Using a Phillips 1 screwdriver, completely unscrew the 8mm screw located in the center of the wheel. Repeat this step for other wheels if needed.
Step 4
Removing the Wheel
- Carefully pull the wheel off of its axle. Repeat for other wheels as necessary.
Carefully pull the wheel off of its axle. Repeat for other wheels as necessary.
Step 5
Front Wheel Suspension
- Pull the top half of the suspension to unclip it.
Pull the top half of the suspension to unclip it.
Step 6
- Remove the top clip along with the spring.
Remove the top clip along with the spring.
Step 7
- Pull up the bottom half of the suspension to unclip it.
Pull up the bottom half of the suspension to unclip it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Maximiliano Cortes
Member since: 02/01/2015
418 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 6-30, Amido Winter 2015
Member of Cal Poly, Team 6-30, Amido Winter 2015
CPSU-AMIDO-W15S6G30
4 Members
8 Guides authored
