Torque King Electric Rtr Rc Monster Truck Rear Wheel Suspension Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          10 - 20 minutes            

Sections

3

• Casing
• 2 steps
• Wheel
• 2 steps
• Rear Wheel Suspension
• 3 steps

Flags

0

• BackTorque King Electric RTR RC Monster Truck

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Casing               

• From the top view, remove each of the four pins that hold the casing in place.

From the top view, remove each of the four pins that hold the casing in place.

1024

Step 2

• Slowly pull the casing up to remove it.

Slowly pull the casing up to remove it.

Step 3

              Removing Screws               

• Using a Phillips 1 screwdriver, completely unscrew the 8mm screw located in the center of the wheel. Repeat this step for other wheels if needed.

Using a Phillips 1 screwdriver, completely unscrew the 8mm screw located in the center of the wheel. Repeat this step for other wheels if needed.

Step 4

              Removing the Wheel               

• Carefully pull the wheel off of its axle. Repeat for other wheels as necessary.

Carefully pull the wheel off of its axle. Repeat for other wheels as necessary.

Step 5

              Rear Wheel Suspension               

• After removing the rear wheels, remove the 8mm screw under each spring with a Phillips 1 screwdriver.

After removing the rear wheels, remove the 8mm screw under each spring with a Phillips 1 screwdriver.

Step 6

• Slide off the bottom part of the rod connected to the chassis.

Slide off the bottom part of the rod connected to the chassis.

Step 7

• Pull the black washer inside the spring downwards and towards the truck’s rear simultaneously in order to remove the suspension.

Pull the black washer inside the spring downwards and towards the truck’s rear simultaneously in order to remove the suspension.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Colton Sholtis                     

Member since: 01/30/2015

257 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team 6-30, Amido Winter 2015                        

                                                  Member of Cal Poly, Team 6-30, Amido Winter 2015 



                    CPSU-AMIDO-W15S6G30                     


                                            4 Members                     


                                            8 Guides authored