Toshiba A1304T Mini Lcd Screen Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          20 - 30 minutes            

Sections

2

• Front Cover
• 3 steps
• Mini LCD Screen
• 2 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackToshiba A1304T

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front Cover               

• Open the phone so that it matches the photos to the left.
• Using a thumb-tack, push-pin, or similar pin, remove the four plastic stoppers located around the main LCD screen.

Open the phone so that it matches the photos to the left.

Using a thumb-tack, push-pin, or similar pin, remove the four plastic stoppers located around the main LCD screen.

1024

Step 2

• With the T8 Torx Security Bit Screwdriver, remove the four screws in the designated locations.
• The T8 Torx Security Bit Screwdriver can be substituted with a small flathead screwdriver. Screw removal may be slightly more difficult however.

With the T8 Torx Security Bit Screwdriver, remove the four screws in the designated locations.

The T8 Torx Security Bit Screwdriver can be substituted with a small flathead screwdriver. Screw removal may be slightly more difficult however.

Step 3

• Insert the head of a flathead screwdriver into the seam between the front cover and the phone.
• Pry gently until the cover gives slightly to create a slightly wider opening. You may hear a distinct pop as you pry.
• Remove the screwdriver and re-insert it into another portion of the seam. Continue making gaps around the cover of the phone until it is completely detached from the body.

Insert the head of a flathead screwdriver into the seam between the front cover and the phone.

Pry gently until the cover gives slightly to create a slightly wider opening. You may hear a distinct pop as you pry.

Remove the screwdriver and re-insert it into another portion of the seam. Continue making gaps around the cover of the phone until it is completely detached from the body.

Step 4

              Mini LCD Screen               

• Using a small Phillips screwdriver, gently pry off the LCD screen from the board.

Using a small Phillips screwdriver, gently pry off the LCD screen from the board.

Step 5

• Using the head of the screwdriver, flip up the black tab connecting the ribbon-wire.
• Gently pull the LCD screen away from the board, the cable should come off with nearly no resistance.

Using the head of the screwdriver, flip up the black tab connecting the ribbon-wire.

Gently pull the LCD screen away from the board, the cable should come off with nearly no resistance.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Christopher                     

Member since: 04/22/2010

90 Reputation

                                      8 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team 16-6, Maness Spring 2010                        

                                                  Member of Cal Poly, Team 16-6, Maness Spring 2010 



                    CPSU-MANESS-S10S16G6                     


                                            4 Members                     


                                            16 Guides authored