Toshiba Cb35 C3300 Chromebook 2 Wlan Wi Fi Pcb Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          10 minutes            

Sections

1

• WLAN Wi-Fi PCB
• 6 steps

Flags

0

• BackToshiba CB35-C3300 Chromebook 2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              WLAN Wi-Fi PCB               

• Remove the two rubber tabs near the front of the computer with a metal spudger and with PH0 Phillips head screwdriver, carefully remove all ten screws and place in a safe location.

Remove the two rubber tabs near the front of the computer with a metal spudger and with PH0 Phillips head screwdriver, carefully remove all ten screws and place in a safe location.

1024

Step 2

• Ensure that there is no debris, dust, or any other foreign materials blocking the Wi-Fi PCB.

Ensure that there is no debris, dust, or any other foreign materials blocking the Wi-Fi PCB.

Step 3

• Carefully peel back the yellow tape by either folding it back or removing it entirely. Use the same PH0 Phillips head screwdriver to remove the single screw that connects the motherboard to the Wi-Fi PCB.

Carefully peel back the yellow tape by either folding it back or removing it entirely. Use the same PH0 Phillips head screwdriver to remove the single screw that connects the motherboard to the Wi-Fi PCB.

Step 4

• When the screw has been removed, the board will naturally spring up. Carefully apply light pressure to back the PCB out of its port.

When the screw has been removed, the board will naturally spring up. Carefully apply light pressure to back the PCB out of its port.

Step 5

• Disconnect the black wire that is plugged onto the 1 or AUX terminal by simply lightly pulling it from the board.

Disconnect the black wire that is plugged onto the 1 or AUX terminal by simply lightly pulling it from the board.

Step 6

• Disconnect the white wire from the 2 or Main plug by lightly pulling it from the PCB.

Disconnect the white wire from the 2 or Main plug by lightly pulling it from the PCB.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Gabriel Bryan                     

Member since: 11/26/2018

303 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       IUPUI, Team S6-G6, Wilson Fall 2018                        

                                                  Member of IUPUI, Team S6-G6, Wilson Fall 2018 



                    IUPUI-WILSON-F18S6G6                     


                                            3 Members                     


                                            6 Guides authored