Toshiba Dynabook T552 58G Screen Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          25 minutes

Sections

Screen
8 steps

Flags

BackToshiba Dynabook T552-58G
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

If your screen is busted, malfunctioning, or just needs to be replaced, this guide will assist you through the process. For best results, all steps should be followed.

What you need

Step 1

              Screen

Peel screw covers off with pointed tweezers. There are four of them.

Peel screw covers off with pointed tweezers. There are four of them.

1024

Step 2

Using a PH 00 screwdriver, unscrew the four screws in each corner of the screen cover. Each screw is 3.3 mm long.

Using a PH 00 screwdriver, unscrew the four screws in each corner of the screen cover. Each screw is 3.3 mm long.

Step 3

Using your fingers, pull the screen covering off.
The cover should pop off.

Using your fingers, pull the screen covering off.

The cover should pop off.

Step 4

Using a PH 0 screwdriver, unscrew the screws connecting the front cover to the screen. There are two and each screw is 3.4 mm long.

Using a PH 0 screwdriver, unscrew the screws connecting the front cover to the screen. There are two and each screw is 3.4 mm long.

Step 5

Using your fingers, pull the wires from the backing of the front cover.
Disconnect the wire from the front cover.

Using your fingers, pull the wires from the backing of the front cover.

Disconnect the wire from the front cover.

Step 6

Using a PH 0 screwdriver, remove the screws from each side of the screen. There are a total of six screws. Each screw is 3.2 mm long.

Using a PH 0 screwdriver, remove the screws from each side of the screen. There are a total of six screws. Each screw is 3.2 mm long.

Step 7

Remove wire from the back of the screen by just lifting and pulling it.

Remove wire from the back of the screen by just lifting and pulling it.

Step 8

Gently remove screen from the rest of the computer.

Gently remove screen from the rest of the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Courtney Orange

Member since: 01/31/2019

327 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Appalachian State University, Team S1-G3, Menagarishvili Spring 2019                        

                                                  Member of Appalachian State University, Team S1-G3, Menagarishvili Spring 2019 



                    APSU-MENAGARISHVILI-S19S1G3                     


                                            3 Members                     


                                            13 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team