Toshiba Encore Mini Speakers Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Battery
5 steps
Speakers
2 steps

Flags

BackToshiba Encore Mini
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

To replace the battery, the rear cover must first be removed.
Using the flat end of the spudger, gently pry open the back case from the rest of the device.
It may be easier to start along one of the long edges and carefully work your way toward the corner, then along the short edge.

To replace the battery, the rear cover must first be removed.

Using the flat end of the spudger, gently pry open the back case from the rest of the device.

It may be easier to start along one of the long edges and carefully work your way toward the corner, then along the short edge.

1024

Step 2

Remove the rear cover and set it aside.

Remove the rear cover and set it aside.

Step 3

Carefully remove the electrical tape that holds the battery in place.

Carefully remove the electrical tape that holds the battery in place.

Step 4

Using needle-nose tweezers, gently push the large white wire connector (connected to the black, red and blue wires) out of its housing.

Using needle-nose tweezers, gently push the large white wire connector (connected to the black, red and blue wires) out of its housing.

Step 5

Gently lift the battery out of the device.
Be careful not to pull on the connecting wires.

Gently lift the battery out of the device.

Be careful not to pull on the connecting wires.

Step 6

              Speakers

Use the spudger to pull the speaker wire plug from its socket.

Use the spudger to pull the speaker wire plug from its socket.

Step 7

Carefully use the metal spudger to remove the speaker from the frame of the phone.
The speaker is attached with some double-sided adhesive and may be difficult to remove.

Carefully use the metal spudger to remove the speaker from the frame of the phone.

The speaker is attached with some double-sided adhesive and may be difficult to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Khaled Alsaghayer

Member since: 03/04/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       IUPUI, Team S5-G5, Wilson Spring 2017                        

                                                  Member of IUPUI, Team S5-G5, Wilson Spring 2017 



                    IUPUI-WILSON-S17S5G5                     


                                            4 Members                     


                                            4 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team