Difficulty
Moderate
Steps
8
Time Required
Suggest a time??
Sections
2
- Motherboard
- 3 steps
- Camera
- 5 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackToshiba Encore WT8-A
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Motherboard
- Remove the 4 – 4.5 mm screws from the motherboard assembly.
Remove the 4 – 4.5 mm screws from the motherboard assembly.
1024
Step 2
- Remove the 2 – 3.5 mm screws from the motherboard assembly.
Remove the 2 – 3.5 mm screws from the motherboard assembly.
Step 3
- The motherboard should come free at this point.
The motherboard should come free at this point.
Step 4
Camera
- Use small plastic opening tool for the following steps.
Use small plastic opening tool for the following steps.
Step 5
- Use small plastic opening tool to pry rear facing camera flat top connector from motherboard.
Use small plastic opening tool to pry rear facing camera flat top connector from motherboard.
Step 6
- The rear facing camera should come free at this point.
The rear facing camera should come free at this point.
Step 7
- Use small plastic opening tool to pry front facing camera flat top connector from the motherboard
Use small plastic opening tool to pry front facing camera flat top connector from the motherboard
Step 8
- The front facing camera should come free at this point.
The front facing camera should come free at this point.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Melanie Mestre
Member since: 09/20/2016
116 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
USF Tampa, Team 17-4, Blackwell Fall 2016
Member of USF Tampa, Team 17-4, Blackwell Fall 2016
USFT-BLACKWELL-F16S17G4
3 Members
8 Guides authored
