Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

  • Battery Removal
  • 5 steps

Flags

2

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackToshiba Excite 7

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery Removal
  • Remove the back cover.
  • Work your fingernail or flat object under the cover’s seal. Start at the top right corner just above the front facing camera this is the device “Weak Spot”.
  • After you pry open the first clip slide the flat object along the perimeter of the cover until the cover is removable. You should hear the clips pop open.

Remove the back cover.

Work your fingernail or flat object under the cover’s seal. Start at the top right corner just above the front facing camera this is the device “Weak Spot”.

After you pry open the first clip slide the flat object along the perimeter of the cover until the cover is removable. You should hear the clips pop open.

1024

Step 2

              Remove Tape
  • Remove any black tape from the device.
  • Keep the tape, you will need to put it back on when you are done.

Remove any black tape from the device.

Keep the tape, you will need to put it back on when you are done.

Step 3

              Unplug Wires
  • Unplug the wires from the battery.
  • The battery is the black rectangle in the middle of the device. The device has two wiring harnesses attached to it, one just above the battery and one just to the right.

Unplug the wires from the battery.

The battery is the black rectangle in the middle of the device. The device has two wiring harnesses attached to it, one just above the battery and one just to the right.

Step 4

              remove screws
  • Unscrew the battery from the device.
  • The device has 5 screws to remove, keep the screws.

Unscrew the battery from the device.

The device has 5 screws to remove, keep the screws.

Step 5

              Unclip and remove battery
  • The battery has one clip you will need to remove. The clip is located at the bottom right corner of the battery just above the right speaker. The speakers and wires are not secured to the battery, they may fall off.
  • Push the clip back then lift the battery up.

The battery has one clip you will need to remove. The clip is located at the bottom right corner of the battery just above the right speaker. The speakers and wires are not secured to the battery, they may fall off.

Push the clip back then lift the battery up.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 6 other contributors 


                    osmel fermin

Member since: 01/15/2015

176 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team 1-3, Tanski Winter 2015                        

                                                  Member of USF Tampa, Team 1-3, Tanski Winter 2015 



                    USFT-TANSKI-W15S1G3                     


                                            4 Members                     


                                            12 Guides authored