Difficulty
Moderate
Steps
6
Time Required
10 - 15 minutes
Sections
2
- Top Panel
- 3 steps
- Fan
- 3 steps
Flags
0
BackToshiba HD-A2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Top Panel
- Remove the three 6mm Phillips head screws on the back of the DVD player with a Phillips #1 screwdriver.
Remove the three 6mm Phillips head screws on the back of the DVD player with a Phillips #1 screwdriver.
1024
Step 2
- Remove the two 3mm Phillips screws on each side of the DVD player using the Phillips #1 screwdriver.
Remove the two 3mm Phillips screws on each side of the DVD player using the Phillips #1 screwdriver.
Step 3
- Using your hand, gently lift the black top panel and safely place it off to the side.
Using your hand, gently lift the black top panel and safely place it off to the side.
Step 4
Fan
- The fan will be attached to the case, connected to the yellow circuit board.
The fan will be attached to the case, connected to the yellow circuit board.
Step 5
- Remove the two 7mm Phillips head screws attaching the fan to the case of the DVD player.
Remove the two 7mm Phillips head screws attaching the fan to the case of the DVD player.
Step 6
- Use your fingers to unplug the red and black wire from the yellow circuit board to completely remove the fan.
Use your fingers to unplug the red and black wire from the yellow circuit board to completely remove the fan.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Nouriyah Saleh
Member since: 10/22/2018
800 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
UC Davis, Team S11-G1, Lore Fall 2018
Member of UC Davis, Team S11-G1, Lore Fall 2018
UCD-LORE-F18S11G1
3 Members
6 Guides authored
