Difficulty
Moderate
Steps
3
Time Required
40 minutes
Sections
1
- Thermal Pads
- 3 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackToshiba NB100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Step 1
Opening the laptop.
- Unscrew all screws from the bottom and unplug the battery.
- Flip the laptop over and by using a prying tool, carefully remove the basel above the keyboard.
- Remove the 2 screws that hold the keyboard, lift it up, unplug it and set it aside.
Unscrew all screws from the bottom and unplug the battery.
Flip the laptop over and by using a prying tool, carefully remove the basel above the keyboard.
Remove the 2 screws that hold the keyboard, lift it up, unplug it and set it aside.
1024
Step 2
Getting to the heat sink.
- Carefully unplug the cables and remove the screws that hold the panel in place.
- Remove the display.
Carefully unplug the cables and remove the screws that hold the panel in place.
Remove the display.
Step 3
Changing the thermal pads.
- Lift up the panel and replace the thermal pads. Make sure they are the correct thickness..
- You can also disconnect the fan and clean it too.
Lift up the panel and replace the thermal pads. Make sure they are the correct thickness..
You can also disconnect the fan and clean it too.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
Simeon Brankov
Member since: 11/08/2020
3,455 Reputation
41 Guides authored
Badges:
17
+14 more badges
