Difficulty

Easy

Steps

10

Time Required

                          10 minutes

Sections

4

  • Battery
  • 3 steps
  • RAM Plate
  • 1 step
  • Hard Drive Plate
  • 2 steps
  • Back Plate
  • 4 steps

Flags

0

  • BackToshiba Portege R705-P35

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn off and unplug the laptop.
  • Failure to turn off and unplug the cable could result in electric shock.
  • Place the laptop upside-side-down with the hinges towards you.

Turn off and unplug the laptop.

Failure to turn off and unplug the cable could result in electric shock.

Place the laptop upside-side-down with the hinges towards you.

1024

Step 2

  • Use your right hand to move the right switch from the locked position to the unlocked position.
  • Use your left hand to move the left switch from the locked position to the unlocked position.

Use your right hand to move the right switch from the locked position to the unlocked position.

Use your left hand to move the left switch from the locked position to the unlocked position.

Step 3

  • While keeping the left switch unlocked, pull the battery away from the computer with your right hand.

While keeping the left switch unlocked, pull the battery away from the computer with your right hand.

Step 4

              RAM Plate
  • Loosen the two captive screws in the plate with a Phillips #00 screwdriver.
  • Remove the plate from the laptop.

Loosen the two captive screws in the plate with a Phillips #00 screwdriver.

Remove the plate from the laptop.

Step 5

              Hard Drive Plate
  • Loosen the two captive screws in the hard drive plate using a Phillips #00 screwdriver.

Loosen the two captive screws in the hard drive plate using a Phillips #00 screwdriver.

Step 6

  • Use your hands to remove the hard drive plate from the laptop.

Use your hands to remove the hard drive plate from the laptop.

Step 7

              Back Plate
  • Remove the two 13 mm screws from the back plate using a Phillips #0 screwdriver.

Remove the two 13 mm screws from the back plate using a Phillips #0 screwdriver.

Step 8

  • Lift and remove the small plate from the laptop.

Lift and remove the small plate from the laptop.

Step 9

  • Remove the thirteen 6 mm screws from the back plate using a Phillips #00 screwdriver.
  • Remove the five 5 mm screws from the back plate using a Phillips #00 screwdriver.

Remove the thirteen 6 mm screws from the back plate using a Phillips #00 screwdriver.

Remove the five 5 mm screws from the back plate using a Phillips #00 screwdriver.

Step 10

  • Pull the back plate off, starting from the right side, being cautious of the ports on the left side.

Pull the back plate off, starting from the right side, being cautious of the ports on the left side.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Kathryn Hockenbury

Member since: 03/23/2022

833 Reputation

                                      8 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team 1-4, Botvin Spring 2022                        

                                                  Member of UMass Dartmouth, Team 1-4, Botvin Spring 2022 



                    UMASSD-BOTVIN-S22S1G4                     


                                            3 Members                     


                                            16 Guides authored