Difficulty

Moderate

Steps

6

Time Required

                          5 minutes

Sections

3

  • Battery
  • 3 steps
  • RAM Plate
  • 1 step
  • RAM
  • 2 steps

Flags

0

  • BackToshiba Portege R705-P35

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn off and unplug the laptop.
  • Failure to turn off and unplug the cable could result in electric shock.
  • Place the laptop upside-side-down with the hinges towards you.

Turn off and unplug the laptop.

Failure to turn off and unplug the cable could result in electric shock.

Place the laptop upside-side-down with the hinges towards you.

1024

Step 2

  • Use your right hand to move the right switch from the locked position to the unlocked position.
  • Use your left hand to move the left switch from the locked position to the unlocked position.

Use your right hand to move the right switch from the locked position to the unlocked position.

Use your left hand to move the left switch from the locked position to the unlocked position.

Step 3

  • While keeping the left switch unlocked, pull the battery away from the computer with your right hand.

While keeping the left switch unlocked, pull the battery away from the computer with your right hand.

Step 4

              RAM Plate
  • Loosen the two captive screws in the plate with a Phillips #00 screwdriver.
  • Remove the plate from the laptop.

Loosen the two captive screws in the plate with a Phillips #00 screwdriver.

Remove the plate from the laptop.

Step 5

              RAM
  • Using a spudger or your fingers, push one of the metal rods on either side of the RAM stick away from it until you hear a light clicking noise.
  • Repeat this procedure with the other metal rod on the opposite side of the RAM stick.

Using a spudger or your fingers, push one of the metal rods on either side of the RAM stick away from it until you hear a light clicking noise.

Repeat this procedure with the other metal rod on the opposite side of the RAM stick.

Step 6

  • Once the RAM stick pops out to an angle, pull it outward.

Once the RAM stick pops out to an angle, pull it outward.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Kathryn Hockenbury

Member since: 03/23/2022

833 Reputation

                                      8 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team 1-4, Botvin Spring 2022                        

                                                  Member of UMass Dartmouth, Team 1-4, Botvin Spring 2022 



                    UMASSD-BOTVIN-S22S1G4                     


                                            3 Members                     


                                            16 Guides authored