Difficulty
Moderate
Steps
8
Time Required
7 - 10 minutes
Sections
2
- Battery
- 4 steps
- Fan
- 4 steps
Flags
0
BackToshiba Portege Z935-P300
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove thirteen 2.5 mm JIS #1 screws.
Remove thirteen 2.5 mm JIS #1 screws.
1024
Step 2
- Remove one 3 mm screw with a T7 Torx screwdriver.
Remove one 3 mm screw with a T7 Torx screwdriver.
Step 3
- Remove five 2 mm JIS #1 screws.
Remove five 2 mm JIS #1 screws.
Step 4
- Push out tab with spudger and remove connector.
Push out tab with spudger and remove connector.
Step 5
Fan
- Remove the backing plate and battery. Identify the fan.
Remove the backing plate and battery. Identify the fan.
Step 6
- Remove two 2.5 mm JIS #1 screws.
Remove two 2.5 mm JIS #1 screws.
Step 7
- Disconnect attached wires using a spudger. Press down tab shown and remove.
Disconnect attached wires using a spudger. Press down tab shown and remove.
Step 8
- Completely remove wires, and remove fan assembly from laptop.
Completely remove wires, and remove fan assembly from laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
David Lopossa
Member since: 08/28/2018
379 Reputation
3 Guides authored
Badges:
6
+3 more badges
Team
IUPUI, Team S1-G2, Arle Fall 2018
Member of IUPUI, Team S1-G2, Arle Fall 2018
IUPUI-ARLE-F18S1G2
3 Members
3 Guides authored
