Difficulty

Moderate

Steps

10

Time Required

                          15 - 20 minutes

Sections

3

  • Battery
  • 4 steps
  • Keyboard
  • 4 steps
  • Power Button Circuit Board
  • 2 steps

Flags

0

  • BackToshiba Satellite 1415-S105

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • The battery is located on the front right corner of the laptop.

The battery is located on the front right corner of the laptop.

1024

Step 2

  • With one finger on the raised grip, slide the latch towards the front of the laptop.

With one finger on the raised grip, slide the latch towards the front of the laptop.

Step 3

  • Pull the battery out towards the side.

Pull the battery out towards the side.

Step 4

  • Lift the battery straight up, out of the computer.

Lift the battery straight up, out of the computer.

Step 5

              Keyboard
  • Using a set of case opening tools, pry open the left and right sides of the black plastic strip above the keyboard.
  • Fully detach the strip.

Using a set of case opening tools, pry open the left and right sides of the black plastic strip above the keyboard.

Fully detach the strip.

Step 6

  • Unscrew the two screws near the top of the keyboard.

Unscrew the two screws near the top of the keyboard.

Step 7

  • Lift the keyboard by holding the middle top of the keyboard.
  • The keyboard is still connected by a ribbon cable to the motherboard.

Lift the keyboard by holding the middle top of the keyboard.

The keyboard is still connected by a ribbon cable to the motherboard.

Step 8

  • Carefully pull upwards on the ribbon cable to detach.
  • Remove keyboard.

Carefully pull upwards on the ribbon cable to detach.

Remove keyboard.

Step 9

              Power Button Circuit Board
  • Unscrew the screws on either side of the power button circuit board.

Unscrew the screws on either side of the power button circuit board.

Step 10

  • Pull upward on the small white ribbon cable to detach from circuit board.

Pull upward on the small white ribbon cable to detach from circuit board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Kiril Lange

Member since: 09/22/2014

943 Reputation

                                      9 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team 3-2, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 3-2, Brown Fall 2014 



                    USFT-BROWN-F14S3G2                     


                                            3 Members                     


                                            18 Guides authored