Difficulty

Easy

Steps

6

Time Required

                          2 minutes            

Sections

2

  • Battery
  • 3 steps
  • RAM Module
  • 3 steps

Flags

0

  • BackToshiba Satellite A205-S5812

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Turn off your laptop before beginning.
  • Turn the laptop over so the base of the laptop faces the ceiling.

Turn off your laptop before beginning.

Turn the laptop over so the base of the laptop faces the ceiling.

1024

Step 2

  • Push the two plastic tabs retaining the battery into the chassis to each respective side. This will push the battery up slightly and release it from the bottom of the notebook.

Push the two plastic tabs retaining the battery into the chassis to each respective side. This will push the battery up slightly and release it from the bottom of the notebook.

Step 3

  • Using a finger or small prying device, pull the battery upwards from the recessed area. Then, simply pull the battery out of the notebook and gently set it aside.

Using a finger or small prying device, pull the battery upwards from the recessed area. Then, simply pull the battery out of the notebook and gently set it aside.

Step 4

              RAM Module               
  • Remove the two 3mm Phillips #00 screws holding the plastic cover over the RAM modules.

Remove the two 3mm Phillips #00 screws holding the plastic cover over the RAM modules.

Step 5

  • Gently lift the plastic cover. Once the plastic cover is removed, the two RAM cards will be visible.

Gently lift the plastic cover. Once the plastic cover is removed, the two RAM cards will be visible.

Step 6

  • Press the silver tabs away from the RAM stick to remove it. Both RAM modules can be removed using this technique.
  • Do not touch the gold strip on the RAM card because the oils on your fingers can potentially cause damage to the module.

Press the silver tabs away from the RAM stick to remove it. Both RAM modules can be removed using this technique.

Do not touch the gold strip on the RAM card because the oils on your fingers can potentially cause damage to the module.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Justin Harms                     

Member since: 04/03/2019

232 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Oregon Institute of Technology, Team S1-G2, Lancaster Spring 2019                        

                                                  Member of Oregon Institute of Technology, Team S1-G2, Lancaster Spring 2019 



                    OIT-LANCASTER-S19S1G2                     


                                            3 Members                     


                                            10 Guides authored