Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

  • Display Screen
  • 5 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackToshiba Satellite A215-S4757

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Display Screen               
  • First, remove the four rubber screw coverings located at the top corners and bottom corners of the screen.
  • Remove the four screws underneath each cover and place them somewhere secure.

First, remove the four rubber screw coverings located at the top corners and bottom corners of the screen.

Remove the four screws underneath each cover and place them somewhere secure.

1024

Step 2

  • Remove the plastic paneling around the screen, and at the bottom of the display.
  • You may need a plastic opening tool to pry the back crease open.

Remove the plastic paneling around the screen, and at the bottom of the display.

You may need a plastic opening tool to pry the back crease open.

Step 3

  • Remove the three screws on each side of the display, and place them somewhere secure.

Remove the three screws on each side of the display, and place them somewhere secure.

Step 4

  • Gently move the display forward so you can see the back of the component.

Gently move the display forward so you can see the back of the component.

Step 5

  • On the back of the display, there is a wire that is plugged in to the display and secured with tape.
  • Gently lift the tape, leaving it attached to the wire.
  • Pull the wire out of its socket in the display backing.
  • The display is now fully detached!

On the back of the display, there is a wire that is plugged in to the display and secured with tape.

Gently lift the tape, leaving it attached to the wire.

Pull the wire out of its socket in the display backing.

The display is now fully detached!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Jacob Brown                     

Member since: 10/10/2016

355 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Texas Tech, Team 12-2, Bennett Fall 2016                        

                                                  Member of Texas Tech, Team 12-2, Bennett Fall 2016 



                    TTU-BENNETT-F16S12G2                     


                                            4 Members                     


                                            6 Guides authored