Difficulty

Moderate

Steps

29

Time Required

                          20 minutes

Sections

8

  • Battery
  • 2 steps
  • Optical Drive
  • 3 steps
  • CD Drive
  • 2 steps
  • Wi-Fi/Memory Cover
  • 2 steps
  • Wi-Fi Card
  • 4 steps
  • Keyboard
  • 5 steps
  • Display Assembly
  • 6 steps
  • Upper Case
  • 5 steps

Flags

2

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackToshiba Satellite A75-S226

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Make sure battery-lock is in the unlock position.
  • Slide button to the left.

Make sure battery-lock is in the unlock position.

Slide button to the left.

1024

Step 2

  • Lift battery out of the computer.

Lift battery out of the computer.

Step 3

              Optical Drive
  • Remove the two 5.62 mm screws from the optical drive cover.

Remove the two 5.62 mm screws from the optical drive cover.

Step 4

  • Remove the optical drive cover.
  • A plastic opening tool or a fingernail may be helpful in lifting it from its groove.

Remove the optical drive cover.

A plastic opening tool or a fingernail may be helpful in lifting it from its groove.

Step 5

  • Using the inset divot, push the optical drive out of the laptop to remove.

Using the inset divot, push the optical drive out of the laptop to remove.

Step 6

              CD Drive
  • Remove the 8.6 mm screw.

Remove the 8.6 mm screw.

Step 7

  • Push the bottom left corner of the CD Drive until the drive protrudes from the case.
  • When a good amount of the CD Drive is showing on the right side, gently pull it out completely.

Push the bottom left corner of the CD Drive until the drive protrudes from the case.

When a good amount of the CD Drive is showing on the right side, gently pull it out completely.

Step 8

              Wi-Fi/Memory Cover
  • Remove the 5.75 mm screw from the cover panel.
  • Turn the laptop over with the screen facing down.

Remove the 5.75 mm screw from the cover panel.

Turn the laptop over with the screen facing down.

Step 9

  • Lift up the cover panel using a plastic opening tool.

Lift up the cover panel using a plastic opening tool.

Step 10

              Wi-Fi Card
  • Remove the 5.64 mm screw from the bottom of the crossing bar.
  • Remove the crossing bar.

Remove the 5.64 mm screw from the bottom of the crossing bar.

Remove the crossing bar.

Step 11

  • Use a plastic opening tool to disconnect the black and white antenna cable’s connectors from the Wi-Fi card.
  • Note that the black wire is connected to the port that is labeled main.

Use a plastic opening tool to disconnect the black and white antenna cable’s connectors from the Wi-Fi card.

Note that the black wire is connected to the port that is labeled main.

Step 12

  • Use fingers to push the clips away from memory card.

Use fingers to push the clips away from memory card.

Step 13

  • Use fingers to remove the Wi-Fi card.

Use fingers to remove the Wi-Fi card.

Step 14

              Keyboard
  • Use the plastic opening tool to lift up the top panel all the way along the keyboard until it loosens.
  • It may be helpful to first pry at the rear of the hinge covers (not shown) to release them. Then Insert the plastic opening tool underneath the top panel’s sides and then front edge.

Use the plastic opening tool to lift up the top panel all the way along the keyboard until it loosens.

It may be helpful to first pry at the rear of the hinge covers (not shown) to release them. Then Insert the plastic opening tool underneath the top panel’s sides and then front edge.

Step 15

  • Remove the top panel by popping the panel out the top left socket, then do the same with the right side.

Remove the top panel by popping the panel out the top left socket, then do the same with the right side.

Step 16

  • Remove the two 3.67 mm screws from the top corners of the keyboard.

Remove the two 3.67 mm screws from the top corners of the keyboard.

Step 17

  • Use fingers to lift up the keyboard from the top.
  • Do not try to remove the keyboard completely because it is still attached to the motherboard.

Use fingers to lift up the keyboard from the top.

Do not try to remove the keyboard completely because it is still attached to the motherboard.

Step 18

  • Remove the cable connecting the keyboard with the motherboard.
  • Be aware of the locking tabs on each side of the ribbon-cable connector—they slide back about 2mm to free the cable.
  • Lift up and remove the keyboard.

Remove the cable connecting the keyboard with the motherboard.

Be aware of the locking tabs on each side of the ribbon-cable connector—they slide back about 2mm to free the cable.

Lift up and remove the keyboard.

Step 19

              Display Assembly
  • Remove the 3.76mm screw from the ground wire.

Remove the 3.76mm screw from the ground wire.

Step 20

  • Use the plastic opening tool to remove the wire.

Use the plastic opening tool to remove the wire.

Step 21

  • Gently pull the black and white wires out of the upper case.
  • Do not pull the wire too much, or you can damage the wire.

Gently pull the black and white wires out of the upper case.

Do not pull the wire too much, or you can damage the wire.

Step 22

  • Remove the 8.6 mm screw on left side of upper case.

Remove the 8.6 mm screw on left side of upper case.

Step 23

  • Remove two 8.6 mm screws on the back corners of the laptop.

Remove two 8.6 mm screws on the back corners of the laptop.

Step 24

  • Lift up the display assembly to remove it.

Lift up the display assembly to remove it.

Step 25

              Upper Case
  • Use the Phillips screwdriver to remove the two 3.7 mm screws from the battery compartment.
  • Then remove the fourteen 8.6 mm screws from the bottom of the case.

Use the Phillips screwdriver to remove the two 3.7 mm screws from the battery compartment.

Then remove the fourteen 8.6 mm screws from the bottom of the case.

Step 26

  • Use the screwdriver to remove six 8.6 mm screws from the top of the case.

Use the screwdriver to remove six 8.6 mm screws from the top of the case.

Step 27

  • Use the plastic opening tool to remove the two speaker wire connectors and the trackpad connector from the motherboard.

Use the plastic opening tool to remove the two speaker wire connectors and the trackpad connector from the motherboard.

Step 28

  • With the plastic opening tool, pry around the entire laptop to separate the upper case.

With the plastic opening tool, pry around the entire laptop to separate the upper case.

Step 29

  • Lift up the upper case to remove.

Lift up the upper case to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 9 other contributors 


                    Garrett Gudgel

Member since: 10/05/2010

751 Reputation

                                      13 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Cal Poly, Team 4-43, Amido Fall 2010                        

                                                  Member of Cal Poly, Team 4-43, Amido Fall 2010 



                    CPSU-AMIDO-F10S4G43                     


                                            5 Members                     


                                            26 Guides authored