Toshiba Satellite A85 S107 15 Fan Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 20 minutes

Sections

Battery
3 steps
Keyboard
9 steps
Fan
3 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Missed a Step

Oops! This guide is currently missing some important steps.

BackToshiba Satellite A85-S107 15"
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Power off the laptop.
Disconnect the power cable from the laptop. If you do not, electric shock may result.

Power off the laptop.

Disconnect the power cable from the laptop. If you do not, electric shock may result.

1024

Step 2

Flip the laptop over and orient it such that the battery faces towards you and the front faces away from you as shown in the diagram.
Unlock the battery by sliding the tab shown to the right
This tab will latch into place.

Flip the laptop over and orient it such that the battery faces towards you and the front faces away from you as shown in the diagram.

Unlock the battery by sliding the tab shown to the right

This tab will latch into place.

Step 3

Slide the tab shown to the left and remain holding it.
This tab does not lock into place like in the first step.
Place your thumb on the grips of the battery as shown.
While holding onto the grips, pull the battery towards you and away from the laptop.

Slide the tab shown to the left and remain holding it.

This tab does not lock into place like in the first step.

Place your thumb on the grips of the battery as shown.

While holding onto the grips, pull the battery towards you and away from the laptop.

Step 4

              Keyboard

Flip the laptop over so that the front tab of the laptop faces you.

Flip the laptop over so that the front tab of the laptop faces you.

Step 5

Unlock the laptop by sliding the front tab to the right.
Open the laptop by lifting the screen up while holding the tab in place.

Unlock the laptop by sliding the front tab to the right.

Open the laptop by lifting the screen up while holding the tab in place.

Step 6

Place the laptop on its left side with the disk drive facing up and the screen open completely.
Locate the rectangular slot on the side of the laptop just above the disk drive.
Insert the flat end of the spudger into the rectangular slot.

Place the laptop on its left side with the disk drive facing up and the screen open completely.

Locate the rectangular slot on the side of the laptop just above the disk drive.

Insert the flat end of the spudger into the rectangular slot.

Step 7

Insert the opening tool into the rectangular slot with the spudger.
Pry off the top part of the laptop’s case (above the keyboard) containing the speakers by using both the spudger and opening tool to push the case away from the computer.
Once the top part of the laptop’s case has been popped off, use your hands to remove it.

Insert the opening tool into the rectangular slot with the spudger.

Pry off the top part of the laptop’s case (above the keyboard) containing the speakers by using both the spudger and opening tool to push the case away from the computer.

Once the top part of the laptop’s case has been popped off, use your hands to remove it.

Step 8

Place the laptop on a level surface with the keyboard facing you.

Place the laptop on a level surface with the keyboard facing you.

Step 9

Remove the two 5mm Phillips #1 screws which hold the keyboard in place.

Remove the two 5mm Phillips #1 screws which hold the keyboard in place.

Step 10

Unhook the plastic tab at the top of the keyboard using the plastic opening tool to pry the top of the keyboard up.

Unhook the plastic tab at the top of the keyboard using the plastic opening tool to pry the top of the keyboard up.

Step 11

Lift up the keyboard from the back end where the function keys are located.
Slide the keyboard out towards the screen.
Be careful not to rip the ribbon out of its port.
This may damage your laptop.

Lift up the keyboard from the back end where the function keys are located.

Slide the keyboard out towards the screen.

Be careful not to rip the ribbon out of its port.

This may damage your laptop.

Step 12

Pull the ribbon wire attaching the keyboard to the computer out of its port.
Before you pull try to hold the ribbon wire as close to the port as possible to prevent it from breaking.

Pull the ribbon wire attaching the keyboard to the computer out of its port.

Before you pull try to hold the ribbon wire as close to the port as possible to prevent it from breaking.

Step 13

Fan

Locate and Remove the three 5mm Phillips #0 screws.

Locate and Remove the three 5mm Phillips #0 screws.

Step 14

Pull the end of the white wire clip out of its port.

Pull the end of the white wire clip out of its port.

Step 15

Take out the fan by lifting it out of its dock.

Take out the fan by lifting it out of its dock.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 10 other contributors

                    Alana

Member since: 04/14/2013

96 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 10-38, Amido Spring 2013                        

                                                  Member of Cal Poly, Team 10-38, Amido Spring 2013 



                    CPSU-AMIDO-S13S10G38                     


                                            4 Members                     


                                            16 Guides authored

Action Shots#

Needs Better Images#

Markup Mishap#

Missed a Step#

Introduction#

What you need#

Team#