Difficulty
Easy
Steps
3
Time Required
2 minutes
Sections
1
- RAM
- 3 steps
Flags
0
BackToshiba Satellite C55-A5140
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Make sure that the device is unplugged, completely off, and that the device is not warm to the touch.
- Flip the device over, and unscrew the 5mm PH#1 screw on L shaped access panel.
- Screw will not come out of access panel: simply unscrew until loose.
Make sure that the device is unplugged, completely off, and that the device is not warm to the touch.
Flip the device over, and unscrew the 5mm PH#1 screw on L shaped access panel.
Screw will not come out of access panel: simply unscrew until loose.
1024
Step 2
- Use the plastic opening tool to open access panel by sliding it into notch near screw and prying access panel(L-shaped) away from device.
- Pull panel completely free from device and set aside.
Use the plastic opening tool to open access panel by sliding it into notch near screw and prying access panel(L-shaped) away from device.
Pull panel completely free from device and set aside.
Step 3
- Push the two metal tabs on each side of RAM stick outward (away from RAM) to unlock from tray.
- Pull ram straight out (away from connector) to remove.
Push the two metal tabs on each side of RAM stick outward (away from RAM) to unlock from tray.
Pull ram straight out (away from connector) to remove.
To reassemble your device, follow these instructions in reverse order. After sliding new RAM into tray, push straight downward to lock it into position.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Cameron Chapman
Member since: 09/27/2017
533 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
Eastern Washington University, Team S1-G5, Carnegie Fall 2017
Member of Eastern Washington University, Team S1-G5, Carnegie Fall 2017
EWU-CARNEGIE-F17S1G5
3 Members
10 Guides authored