Difficulty

Easy

Steps

6

Time Required

                          5 minutes

Sections

2

  • Battery
  • 1 step
  • Keyboard
  • 5 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackToshiba Satellite C55-A5310

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Push the left tab with your left hand.
  • Then push the right tab with your right hand.
  • While your right hand is still pushing, remove the battery with your left hand.

Push the left tab with your left hand.

Then push the right tab with your right hand.

While your right hand is still pushing, remove the battery with your left hand.

1024

Step 2

              Keyboard
  • Remove this screw with a JIS #000 screwdriver.
  • This screw does not come out all the way.

Remove this screw with a JIS #000 screwdriver.

This screw does not come out all the way.

Step 3

  • Remove the panel with the plastic opening tool. Make sure you lift it on all four sides.

Remove the panel with the plastic opening tool. Make sure you lift it on all four sides.

Step 4

  • Using the JIS #000 screwdriver, remove the .5mm screw.

Using the JIS #000 screwdriver, remove the .5mm screw.

Step 5

  • Use the plastic opening tool to remove the keyboard from the laptop.

Use the plastic opening tool to remove the keyboard from the laptop.

Step 6

  • Once keyboard is popped out, use a nylon spudger to undo the ribbon or flap that attaches the back of the keyboard to the inside base of the laptop.

Once keyboard is popped out, use a nylon spudger to undo the ribbon or flap that attaches the back of the keyboard to the inside base of the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 2 other contributors 


                    Kari Rodgers

Member since: 02/08/2018

482 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Sam Houston State, Team S16-G1, Nardone Spring 2018                        

                                                  Member of Sam Houston State, Team S16-G1, Nardone Spring 2018 



                    SHSU-NARDONE-S18S16G1                     


                                            5 Members                     


                                            10 Guides authored

Anthony Francisco - Aug 27, 2018

Reply

Step has the incorrect screw to release the keyboard. There is no need to open the back panel. The screw which holds down the keyboard is the long screw between the Serial Number sticker and the battery release switch #2.

Jeff Breuer - Jul 11, 2020