Toshiba Satellite C55 B5200 Ram Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          5 minutes            

Sections

2

• Battery
• 2 steps
• RAM
• 2 steps

Flags

0

• BackToshiba Satellite C55-B5200

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Turn the laptop off and remove all sources of power.
• Flip the laptop over so that way the bottom is facing towards you.
• Remove the two 6.6mm Phillips #0 screws from the battery.

Turn the laptop off and remove all sources of power.

Flip the laptop over so that way the bottom is facing towards you.

Remove the two 6.6mm Phillips #0 screws from the battery.

1024

Step 2

• Pull the battery out of the laptop.

Pull the battery out of the laptop.

Step 3

              RAM               

• Flex the metal retaining clips on the side of the RAM away from one another.
• If done correctly, the RAM will pop out of its lock.

Flex the metal retaining clips on the side of the RAM away from one another.

If done correctly, the RAM will pop out of its lock.

Step 4

• Pull the RAM out of the socket to remove.

Pull the RAM out of the socket to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Pablo Andrade                     

Member since: 02/14/2018

1,057 Reputation

                                      7 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       USF Tampa, Team S3-G1, Nance Spring 2018                        

                                                  Member of USF Tampa, Team S3-G1, Nance Spring 2018 



                    USFT-NANCE-S18S3G1                     


                                            4 Members                     


                                            15 Guides authored                     

Andrew Kling - Jul 11, 2020

Reply

So the complete bottom panel doesn’t need to be removed to access the memory? The bottom panel that is held in place by another 8 screws?