Difficulty

Moderate

Steps

9

Time Required

                          25 - 40 minutes

Sections

3

  • Battery
  • 3 steps
  • Keyboard
  • 3 steps
  • Fan
  • 3 steps

Flags

0

  • BackToshiba Satellite C650D

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Unplug the laptop and turn it off.
  • Flip the laptop upside down.
  • Locate the battery on the underside of the laptop.

Unplug the laptop and turn it off.

Flip the laptop upside down.

Locate the battery on the underside of the laptop.

1024

Step 2

  • Push the two latches away from the battery.

Push the two latches away from the battery.

Step 3

  • Slide the battery away from the laptop.
  • Locate the serial number on the battery to order a replacement.

Slide the battery away from the laptop.

Locate the serial number on the battery to order a replacement.

Step 4

              Keyboard
  • Remove the fourteen 6.0mm and two 2.0mm Philip’s #0 screws connecting the keyboard to the back.
  • Make sure you keep track of all the screws.

Remove the fourteen 6.0mm and two 2.0mm Philip’s #0 screws connecting the keyboard to the back.

Make sure you keep track of all the screws.

Step 5

  • Flip the computer over.
  • Use a nylon spudger to lift the keyboard.
  • Go around the edge of the keyboard and lift until the keyboard separates from the back.
  • Only lift the keyboard a little at a time, otherwise you risk damaging the plastic.

Flip the computer over.

Use a nylon spudger to lift the keyboard.

Go around the edge of the keyboard and lift until the keyboard separates from the back.

Only lift the keyboard a little at a time, otherwise you risk damaging the plastic.

Step 6

  • Detach the ribbon cable that connects the keyboard to the motherboard.

Detach the ribbon cable that connects the keyboard to the motherboard.

Step 7

              Fan
  • Detach the cable connecting the fan to the motherboard.

Detach the cable connecting the fan to the motherboard.

Step 8

  • Remove the one 3.0mm and one 5.0mm Philips #0 screws holding the fan in place.

Remove the one 3.0mm and one 5.0mm Philips #0 screws holding the fan in place.

Step 9

  • Remove the fan by pulling it out slowly.

Remove the fan by pulling it out slowly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 1 other contributor 


                    Brenna Callahan

Member since: 10/21/2015

868 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       UMass Dartmouth, Team 5-2, Gulbrandsen Fall 2015                        

                                                  Member of UMass Dartmouth, Team 5-2, Gulbrandsen Fall 2015 



                    UMASSD-GULBRANDSEN-F15S5G2                     


                                            3 Members                     


                                            10 Guides authored