Difficulty
Easy
Steps
3
Time Required
10 - 15 minutes
Sections
1
- Random Access Memory (RAM)
- 3 steps
Flags
0
BackToshiba Satellite C655D-S5084
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Random Access Memory (RAM)
- Turn the laptop over and place upside down on a flat surface.
- Remove the 5.5 mm “F5” screw with the Phillips #1 screwdriver and lift off plastic cover.
Turn the laptop over and place upside down on a flat surface.
Remove the 5.5 mm “F5” screw with the Phillips #1 screwdriver and lift off plastic cover.
1024
Step 2
- Take two fingers and gently pull the two metal tabs away from the RAM module as shown.
- There are two tabs for each of the two RAM modules.
- The RAM module should be slightly dislodged from the base after the two tabs are pulled.
Take two fingers and gently pull the two metal tabs away from the RAM module as shown.
There are two tabs for each of the two RAM modules.
The RAM module should be slightly dislodged from the base after the two tabs are pulled.
Step 3
- Grip the edge of the card and slide the RAM module out by pulling horizontally.
- Once the first RAM module has been removed, repeat steps 2 and 3 to remove the second RAM module.
Grip the edge of the card and slide the RAM module out by pulling horizontally.
Once the first RAM module has been removed, repeat steps 2 and 3 to remove the second RAM module.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 5 other contributors
Shelby Kunz
Member since: 04/19/2013
57 Reputation
5 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 2-20, Maness Spring 2013
Member of Cal Poly, Team 2-20, Maness Spring 2013
CPSU-MANESS-S13S2G20
4 Members
10 Guides authored
