Difficulty
Moderate
Steps
13
Time Required
20 minutes
Sections
2
- Battery
- 2 steps
- Cooling Fan
- 11 steps
Flags
0
BackToshiba Satellite C855-S5115
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Use two fingers to pull the ridged lock tabs on the bottom of the computer toward the edges. This will unlock the battery.
Use two fingers to pull the ridged lock tabs on the bottom of the computer toward the edges. This will unlock the battery.
1024
Step 2
- Holding the left tab in place, use the groove located between the two tabs to pry the battery up and out.
Holding the left tab in place, use the groove located between the two tabs to pry the battery up and out.
Step 3
Cooling Fan
- Remove the ten 7mm Phillips screws located on the bottom of the laptop using the Phillips #1 screwdriver.
Remove the ten 7mm Phillips screws located on the bottom of the laptop using the Phillips #1 screwdriver.
Step 4
- Remove the 7mm Phillips screw located on the easy access panel on the bottom of the laptop using a Phillips #1 screwdriver.
Remove the 7mm Phillips screw located on the easy access panel on the bottom of the laptop using a Phillips #1 screwdriver.
Step 5
- Insert a plastic opening tool and follow the edges to open the panel.
Insert a plastic opening tool and follow the edges to open the panel.
Step 6
- Remove the three 3.5mm Phillips #1 screws indicated in the picture.
Remove the three 3.5mm Phillips #1 screws indicated in the picture.
Step 7
- Remove the 3mm Phillips #1 screw holding the HDD in place, then slide the HDD towards the sticker.
Remove the 3mm Phillips #1 screw holding the HDD in place, then slide the HDD towards the sticker.
Step 8
- Pull the HDD out.
Pull the HDD out.
Step 9
- Insert a plastic opening tool in between the panel and the main assembly.
Insert a plastic opening tool in between the panel and the main assembly.
Step 10
- Work your way around the laptop to remove the base plate.
Work your way around the laptop to remove the base plate.
Step 11
- Remove the single 1.5mm Phillips #1 screw located next to the cooling fan.
Remove the single 1.5mm Phillips #1 screw located next to the cooling fan.
Step 12
- Gently pull out the two pin connector.
Gently pull out the two pin connector.
Step 13
- Remove the CPU fan.
Remove the CPU fan.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Claire Fletcher
Member since: 04/05/2018
958 Reputation
7 Guides authored
Badges:
11
+8 more badges
Team
Linn Benton Community College, Team S1-G4, Johnson Spring 2018
Member of Linn Benton Community College, Team S1-G4, Johnson Spring 2018
LBCC-JOHNSON-S18S1G4
4 Members
14 Guides authored