Toshiba Satellite Cl15T B1204X Power Connector Replacement Repair Guide

Difficulty

Easy

Steps

8

Time Required

                          10 minutes            

Sections

2

• Battery
• 6 steps
• Power Connector
• 2 steps

Flags

0

• BackToshiba Satellite CL15t-B1204X

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Flip the laptop over so the bottom of the device is facing upward.

Flip the laptop over so the bottom of the device is facing upward.

1024

Step 2

• Unscrew the 10 5mm Phillips screws, located on the bottom side of the notebook using the PH1 bit and the Magnetic Driver.

Unscrew the 10 5mm Phillips screws, located on the bottom side of the notebook using the PH1 bit and the Magnetic Driver.

Step 3

• Pry open the bottom cover of the notebook with the plastic spudger tools. Slide a thin tool along the edges without ports to pop open the latches.
• Be careful not to bend or crack the plastic back cover.

Pry open the bottom cover of the notebook with the plastic spudger tools. Slide a thin tool along the edges without ports to pop open the latches.

Be careful not to bend or crack the plastic back cover.

Step 4

• Remove the 1" yellow tape on top of the battery. This piece of tape is holding down the battery connection cable.

Remove the 1" yellow tape on top of the battery. This piece of tape is holding down the battery connection cable.

Step 5

• Lightly grip the battery on the two longest sides. Gently pull up until the adhesive on the notebook is separated from the battery.

Lightly grip the battery on the two longest sides. Gently pull up until the adhesive on the notebook is separated from the battery.

Step 6

• Carefully unplug the battery from the device motherboard.

Carefully unplug the battery from the device motherboard.

Step 7

              Power Connector               

• Disconnect the charging connector from the motherboard using the blue iFixIt opening tool by sliding it away from the connector.

Disconnect the charging connector from the motherboard using the blue iFixIt opening tool by sliding it away from the connector.

Step 8

• Pry the power connector upwards from the side of the laptop using the opening tool, then remove the part from the laptop.

Pry the power connector upwards from the side of the laptop using the opening tool, then remove the part from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Matthew Hook                     

Member since: 03/25/2019

439 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       IUPUI, Team S1-G6, Hovde Fall 2019                        

                                                  Member of IUPUI, Team S1-G6, Hovde Fall 2019 



                    IUPUI-HOVDE-F19S1G6                     


                                            4 Members                     


                                            6 Guides authored