Difficulty
Moderate
Steps
10
Time Required
15 minutes
Sections
2
- Battery
- 7 steps
- Wifi Card
- 3 steps
Flags
0
BackToshiba Satellite Click 2 Pro
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Working on your device while it is turned on may result in electric shock. Make sure to shut down and unplug your device before you begin.
- Push down on the tablet sides until you feel a click, then pull up.
- This will separate the tablet from the detachable base, make sure to hold down the keyboard for easier detachment.
Working on your device while it is turned on may result in electric shock. Make sure to shut down and unplug your device before you begin.
Push down on the tablet sides until you feel a click, then pull up.
This will separate the tablet from the detachable base, make sure to hold down the keyboard for easier detachment.
1024
Step 2
- Remove the base of the tablet from the screen using a plastic opening tool.
- Make sure to separate the base evenly on both sides when removing it from the screen.
Remove the base of the tablet from the screen using a plastic opening tool.
Make sure to separate the base evenly on both sides when removing it from the screen.
Step 3
- Remove the battery power connector using ESD safe tweezers.
Remove the battery power connector using ESD safe tweezers.
Step 4
- Remove the LED ribbon cable using ESD safe tweezers.
- Remove the SIM card ribbon cable using ESD safe tweezers.
- Remove the Docking connector ribbon cable using plastic opening tool.
- The ribbons may be stuck to the battery so make sure to peel off gently to prevent damage.
- Make sure to flip up the white connector attached to the LED and Sim Card ribbons before removing them .
Remove the LED ribbon cable using ESD safe tweezers.
Remove the SIM card ribbon cable using ESD safe tweezers.
Remove the Docking connector ribbon cable using plastic opening tool.
The ribbons may be stuck to the battery so make sure to peel off gently to prevent damage.
Make sure to flip up the white connector attached to the LED and Sim Card ribbons before removing them .
Step 5
- Remove the LCD Display ribbon cable using a plastic opening tool.
- Remove the I/O ribbon cable using a plastic opening tool.
- The ribbons may be stuck to the battery so make sure to peel them off gently to prevent damage.
Remove the LCD Display ribbon cable using a plastic opening tool.
Remove the I/O ribbon cable using a plastic opening tool.
The ribbons may be stuck to the battery so make sure to peel them off gently to prevent damage.
Step 6
- Remove five 3.5mm Phillips J0 screws using a Phillips screw driver.
Remove five 3.5mm Phillips J0 screws using a Phillips screw driver.
Step 7
- Remove the battery from its holding position.
Remove the battery from its holding position.
Step 8
Wifi Card
- Remove the 3mm screw J0 Phillips screw with the Philips screw driver.
Remove the 3mm screw J0 Phillips screw with the Philips screw driver.
Step 9
- Remove the black and white cables attached using ESD safe tweezers.
Remove the black and white cables attached using ESD safe tweezers.
Step 10
- Remove wifi card.
Remove wifi card.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Paul DeOrsey
Member since: 03/10/2016
893 Reputation
5 Guides authored
Badges:
13
+10 more badges
Team
UMass Dartmouth, Team 4-3, Catania Spring 2016
Member of UMass Dartmouth, Team 4-3, Catania Spring 2016
UMASSD-CATANIA-S16S4G3
3 Members
10 Guides authored
