Difficulty
Easy
Steps
4
Time Required
5 - 15 minutes
Sections
1
- RAM
- 4 steps
Flags
0
BackToshiba Satellite E45W-C4200X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The RAM is a vital piece of hardware that is used to load programs and data.
Before using this guide, make sure to review the troubleshooting page to ensure the RAM will need to be replaced.
Make sure to power off your laptop completely and disconnect from any external power source prior to beginning the process.
What you need
Step 1
RAM
- Use the Phillips #0 screwdriver to remove the ten 1 mm screws on the back panel.
Use the Phillips #0 screwdriver to remove the ten 1 mm screws on the back panel.
1024
Step 2
- Use the plastic opening tool to separate the back panel from the rest of the computer.
- Be careful and do not to crack the panel.
Use the plastic opening tool to separate the back panel from the rest of the computer.
Be careful and do not to crack the panel.
Step 3
- Remove the grey film covering the RAM located on the left side of the computer.
Remove the grey film covering the RAM located on the left side of the computer.
Step 4
- Apply pressure on the inside of both brackets until the RAM chips are released.
- Repeat this step for RAM Slot B.
Apply pressure on the inside of both brackets until the RAM chips are released.
Repeat this step for RAM Slot B.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Bartow Keller
Member since: 02/20/2020
166 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
The Citadel Military College of South Carolina, Team S3-G19, Eggleston Spring 2020
Member of The Citadel Military College of South Carolina, Team S3-G19, Eggleston Spring 2020
CMCSC-EGGLESTON-S20S3G19
4 Members
6 Guides authored
