Toshiba Satellite L55T B5271 Wireless Card Replacement Repair Guide

Difficulty

Easy

Steps

8

Time Required

                          5 - 8 minutes            

Sections

3

• Battery
• 3 steps
• Back Panel
• 1 step
• Wireless Card
• 4 steps

Flags

0

• BackToshiba Satellite L55t-B5271

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Make sure you turn the laptop off first.
• Close the laptop lid and flip it over so that Toshiba logo is facing down.

Make sure you turn the laptop off first.

Close the laptop lid and flip it over so that Toshiba logo is facing down.

1024

Step 2

• Remove the two 6.5 mm Phillips head screws indicated using a Phillips #00 screw driver.

Remove the two 6.5 mm Phillips head screws indicated using a Phillips #00 screw driver.

Step 3

• Once the screws are removed, slide the battery pack out of the computer.

Once the screws are removed, slide the battery pack out of the computer.

Step 4

              Back Panel               

• Remove all 6.5 mm Philips head screws on the back cover of the laptop with a Philips #00 screwdriver.
• Use the plastic opening tool to remove the back cover from the laptop.
• Be aware that static discharge can cause damage to sensitive electrical components within the computer. To avoid this you can wear an anti-static wrist strap.

Remove all 6.5 mm Philips head screws on the back cover of the laptop with a Philips #00 screwdriver.

Use the plastic opening tool to remove the back cover from the laptop.

Be aware that static discharge can cause damage to sensitive electrical components within the computer. To avoid this you can wear an anti-static wrist strap.

Step 5

              Wireless Card               

• Remove the ribbon by flipping up the tabs and using the black tweezers to gently pull the ribbon out from both ends.

Remove the ribbon by flipping up the tabs and using the black tweezers to gently pull the ribbon out from both ends.

Step 6

• Remove the tape from the card.
• Disconnect the wires using the #4 black spudger tool.

Remove the tape from the card.

Disconnect the wires using the #4 black spudger tool.

Step 7

• Remove the 3mm Phillips head screw with a Phillips #00 screwdriver.

Remove the 3mm Phillips head screw with a Phillips #00 screwdriver.

Step 8

• Pull up on the wireless card and remove it from the device.

Pull up on the wireless card and remove it from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Noelle Dulude                     

Member since: 03/19/2018

460 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       UMass Dartmouth, Team S3-G3, Peak Spring 2018                        

                                                  Member of UMass Dartmouth, Team S3-G3, Peak Spring 2018 



                    UMASSD-PEAK-S18S3G3                     


                                            3 Members                     


                                            8 Guides authored