Toshiba Satellite L655D S5095 Chat Camera And Microphone Daughter Board Replacement Repair Guide

Difficulty

Difficult

Steps

4

Time Required

                          15 - 20 minutes            

Sections

1

• Chat Camera and Microphone Daughter Board
• 4 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackToshiba Satellite L655D-S5095

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

This will fix:

• A broken video chat cameraA broken microphone

What you need

Step 1

              Chat Camera and Microphone Daughter Board               

• Using a plastic opening tool, remove the four plastic stickers located on the four corners of the LCD screen assembly. These plastic stickers are covering screws.
• Use a Phillips #1 screwdriver to remove the now uncovered 5.75mm screws and place them to the side.

Using a plastic opening tool, remove the four plastic stickers located on the four corners of the LCD screen assembly. These plastic stickers are covering screws.

Use a Phillips #1 screwdriver to remove the now uncovered 5.75mm screws and place them to the side.

1024

Step 2

• With a plastic soft pry tool, open up the laptop display assembly by methodically prying from left to right. Be careful to not damage any internal circuitry.
• Do not attempt to pry apart the bottom, the LCD assembly never gets fully disassembled in this tutorial.

With a plastic soft pry tool, open up the laptop display assembly by methodically prying from left to right. Be careful to not damage any internal circuitry.

Do not attempt to pry apart the bottom, the LCD assembly never gets fully disassembled in this tutorial.

Step 3

• Remove the 2 pieces of black tape using a sharp tool to free the camera board, note that the camera board is still connected to a cable.

Remove the 2 pieces of black tape using a sharp tool to free the camera board, note that the camera board is still connected to a cable.

Step 4

• Carefully disconnect the camera board from the laptop. We used tweezers.

Carefully disconnect the camera board from the laptop. We used tweezers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 8 other contributors 

                    Robby                     

Member since: 02/04/2013

52 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Cal Poly, Team 7-7, Maness Winter 2013                        

                                                  Member of Cal Poly, Team 7-7, Maness Winter 2013 



                    CPSU-MANESS-W13S7G7                     


                                            5 Members                     


                                            6 Guides authored