Toshiba Satellite L670 Hdd Replacement Repair Guide

Difficulty

Very easy

Steps

9

Time Required

                          5 minutes            

Sections

1

• HDD
• 9 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackToshiba Satellite L670

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Turn off the computer               

• Turn off the computer and unplug the power from the computer.

Turn off the computer and unplug the power from the computer.

1024

Step 2

              Flip Laptop               

• Turn the laptop upside down. Locate the two latches on either side of the battery.
• Now the battery comes off.

Turn the laptop upside down. Locate the two latches on either side of the battery.

Now the battery comes off.

Step 3

              Remove battery               

• Remove the battery

Remove the battery

Step 4

              Remove rear panel               

• Remove the back plate

Remove the back plate

Step 5

              Remove the HDD               

• Pull the HDD to the left using the silver tab.
• Pull up on the silver tab and remove the hard drive from the slot.

Pull the HDD to the left using the silver tab.

Pull up on the silver tab and remove the hard drive from the slot.

Step 6

              Unscrew the HDD cover               

• Remove the 4 screws from the hard drive.

Remove the 4 screws from the hard drive.

Step 7

              Insert your new SSD in the case               

• Take your new SSD hard drive.
• Place the SSD in the silver case.
• Place back the 4 screws you just removed.

Take your new SSD hard drive.

Place the SSD in the silver case.

Place back the 4 screws you just removed.

Step 8

              Insert SSD               

• Insert the SSD into the laptop.
• Slide the SSD to the right into the socket.

Insert the SSD into the laptop.

Slide the SSD to the right into the socket.

Step 9

              Place back panel + battery               

• Replace the back panel and screw it in place.
• Put the battery back in, you will hear a click once it falls into place.

Replace the back panel and screw it in place.

Put the battery back in, you will hear a click once it falls into place.

To reassemble the device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

        These translators are helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

Corey Meyer

Russell Repair Co.

Thomas Keulemans

Max Tech

and 2 others…

                 +2                  

Author

                                      with 2 other contributors 

                    levi lenaers                     

Member since: 09/24/2016

169 Reputation

                                      1 Guide authored                  



                       Badges:
                       2