Difficulty

Moderate

Steps

7

Time Required

                          20 minutes

Sections

2

  • Battery
  • 3 steps
  • Keyboard
  • 4 steps

Flags

0

  • BackToshiba Satellite L675D-S7016

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Power down the computer and unplug the power adapter.

Power down the computer and unplug the power adapter.

1024

Step 2

  • Flip the laptop upside down. Locate the two latches on both sides of the battery.

Flip the laptop upside down. Locate the two latches on both sides of the battery.

Step 3

  • Slide the latch on the right outwards, releasing the lock. The latch stays unlocked once moved.
  • Simultaneously slide the latch on the left outwards while pulling the battery towards you.
  • Do not touch the metal connectors on the laptop and the battery.

Slide the latch on the right outwards, releasing the lock. The latch stays unlocked once moved.

Simultaneously slide the latch on the left outwards while pulling the battery towards you.

Do not touch the metal connectors on the laptop and the battery.

Step 4

              Keyboard
  • Pry under the plastic strip, starting on the top right side of the key board with a Heavy Duty Spudger.
  • Once the first corner is raised, use your hand pulling upwards and release the rest of the strip.

Pry under the plastic strip, starting on the top right side of the key board with a Heavy Duty Spudger.

Once the first corner is raised, use your hand pulling upwards and release the rest of the strip.

Step 5

  • Remove the first 3mm screw with the Phillips #1 screwdriver.
  • Remove the next three 3mm screws.

Remove the first 3mm screw with the Phillips #1 screwdriver.

Remove the next three 3mm screws.

Step 6

  • Lift the keyboard gently . Slide it forward towards the screen and speakers. This reveals the connection needed for the next step.

Lift the keyboard gently . Slide it forward towards the screen and speakers. This reveals the connection needed for the next step.

Step 7

  • Use the pointed end of the Heavy-Duty Spudger and push the pins toward the screen, leaving them in this position.
  • Carefully slide the connector out of the port.

Use the pointed end of the Heavy-Duty Spudger and push the pins toward the screen, leaving them in this position.

Carefully slide the connector out of the port.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Austin Bons

Member since: 09/22/2016

1,122 Reputation

                                      8 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       UC Davis, Team 2-2, Oliver Fall 2016                        

                                                  Member of UC Davis, Team 2-2, Oliver Fall 2016 



                    UCD-OLIVER-F16S2G2                     


                                            5 Members                     


                                            10 Guides authored