Difficulty

Moderate

Steps

7

Time Required

                          15 - 45 minutes

Sections

3

  • Battery
  • 1 step
  • Keyboard
  • 3 steps
  • Optical Disc Drive
  • 3 steps

Flags

0

  • BackToshiba Satellite L755D-S5150

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • After shutting down your laptop, turn your laptop over and click the left tab left, then pull the right tab right as you pull the battery out.
  • This step should always be done before working on your laptop to minimize electrostatic shock.

After shutting down your laptop, turn your laptop over and click the left tab left, then pull the right tab right as you pull the battery out.

This step should always be done before working on your laptop to minimize electrostatic shock.

1024

Step 2

              Keyboard
  • Using the plastic opening tool carefully pry the plastic strip that sits at the top of the keyboard.

Using the plastic opening tool carefully pry the plastic strip that sits at the top of the keyboard.

Step 3

  • Use the Phillips PH00 to unscrew the four 4mm screws that holds the keyboard in place.
  • Using the plastic opening tool carefully pry your keyboard out without disturbing the cord underneath it.

Use the Phillips PH00 to unscrew the four 4mm screws that holds the keyboard in place.

Using the plastic opening tool carefully pry your keyboard out without disturbing the cord underneath it.

Step 4

  • Remaining is the cord that connects the keyboard to the motherboard. Remove this cord after the tabs are pressed in that releases keyboard.

Remaining is the cord that connects the keyboard to the motherboard. Remove this cord after the tabs are pressed in that releases keyboard.

Step 5

              Optical Disc Drive
  • Use the screwdiver and the Phillips PH00 to unscrew the three, 4mm screws for the RAM compartment

Use the screwdiver and the Phillips PH00 to unscrew the three, 4mm screws for the RAM compartment

Step 6

  • Use the Phillips PH00 to remove the 4mm screw that holds the ODD.
  • Slide the ODD outward.

Use the Phillips PH00 to remove the 4mm screw that holds the ODD.

Slide the ODD outward.

Step 7

  • Remove the two 4mm screws and the plate attached to the ODD.

Remove the two 4mm screws and the plate attached to the ODD.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    Michael Griskewicz

Member since: 10/06/2016

147 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team 2-5, Sullivan Fall 2016                        

                                                  Member of USF Tampa, Team 2-5, Sullivan Fall 2016 



                    USFT-SULLIVAN-F16S2G5                     


                                            4 Members                     


                                            5 Guides authored