Toshiba Satellite P105 S6147 Ram Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 - 15 minutes

Sections

RAM
5 steps

Flags

BackToshiba Satellite P105-S6147
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

All the tools you will need in this guide can be found in the iFixit Pro Toolkit. We suggest you perform this replacement on a large, level workspace where you can avoid knocking small parts onto the floor. Label any small parts so you know where to put them when reassembling the laptop.

Consult the Toshiba Satellite P105-S6147 Device Page for further questions.

Step 1

RAM

Begin with the laptop laying down on a flat surface, with the bottom facing up.

Begin with the laptop laying down on a flat surface, with the bottom facing up.

1024

Step 2

Remove the battery from the device.
The battery is located in the bottom, left hand corner of the device.
Slide the lock switch to the unlocked position.
Slide the release lever towards the unlock switch. The battery should now rotate out of its dock in the laptop.

Remove the battery from the device.

The battery is located in the bottom, left hand corner of the device.

Slide the lock switch to the unlocked position.

Slide the release lever towards the unlock switch. The battery should now rotate out of its dock in the laptop.

Step 3

Open the casing directly above the battery.
Use a Phillips #0 screwdriver to remove two 4 mm screws located at the top of the casing.
Once the cover is removed the RAM sticks will be visible.

Open the casing directly above the battery.

Use a Phillips #0 screwdriver to remove two 4 mm screws located at the top of the casing.

Once the cover is removed the RAM sticks will be visible.

Step 4

Use a nylon spudger to disconnect the tabs from the RAM. The tabs are located on either side of the RAM.
Apply light, outward force to the tabs.

Use a nylon spudger to disconnect the tabs from the RAM. The tabs are located on either side of the RAM.

Apply light, outward force to the tabs.

Step 5

Use the iFixit opening tool to apply light pressure to the bottom of the upper RAM stick.
The RAM stick should come loose and be removable by hand.
Repeat the previous steps to remove the lower RAM stick.

Use the iFixit opening tool to apply light pressure to the bottom of the upper RAM stick.

The RAM stick should come loose and be removable by hand.

Repeat the previous steps to remove the lower RAM stick.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors

                    Benjamin Wilkinson

Member since: 09/21/2018

905 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       University of North Texas, Team S1-G2, Friess Fall 2019                        

                                                  Member of University of North Texas, Team S1-G2, Friess Fall 2019 



                    UNT-FRIESS-F19S1G2                     


                                            2 Members                     


                                            5 Guides authored

Introduction#

Team#

Introduction

Team