Difficulty
Moderate
Steps
14
Time Required
15 - 20 minutes
Sections
3
- Battery
- 2 steps
- Hard Drive
- 3 steps
- Speakers
- 9 steps
Flags
5
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Missed a Step
Oops! This guide is currently missing some important steps.
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackToshiba Satellite P755-EZ1511D Laptop
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Step 1
Battery
- First flip the device over so that the back side is facing upwards
First flip the device over so that the back side is facing upwards
1024
Step 2
- Push the two sliders toward the edge of the laptop.
- Remove the battery.
Push the two sliders toward the edge of the laptop.
Remove the battery.
Step 3
Hard Drive
- First, remove the screw holding the hard drive cover in place.
First, remove the screw holding the hard drive cover in place.
Step 4
- Lift the cover and set it aside.
Lift the cover and set it aside.
Step 5
- Remove the hard drive.
Remove the hard drive.
Step 6
Speakers
- Remove all of the screws labeled F8 from the backside of the device.
Remove all of the screws labeled F8 from the backside of the device.
Step 7
- Flip the device over and open it up.
- Using your pry tool begin to pop the keyboard upwards starting from the side closest to the screen. You will hear an audible “pop” sound.
Flip the device over and open it up.
Using your pry tool begin to pop the keyboard upwards starting from the side closest to the screen. You will hear an audible “pop” sound.
Step 8
- After popping the keyboard off you need to disconnect the keyboard from the motherboard.
After popping the keyboard off you need to disconnect the keyboard from the motherboard.
Step 9
- Remove the two screws labeled F8 in the shown places.
Remove the two screws labeled F8 in the shown places.
Step 10
- Remove the optical drive from the device. Just pull it out.
Remove the optical drive from the device. Just pull it out.
Step 11
- The next step is to unplug the speakers from the motherboard. The wire shown is the speaker wire.
The next step is to unplug the speakers from the motherboard. The wire shown is the speaker wire.
Step 12
- Next, take your pry tool again and start to lift around the edge of the device. Once you get it lifted enough, use your hands to pop the top panel of the base of the device.
Next, take your pry tool again and start to lift around the edge of the device. Once you get it lifted enough, use your hands to pop the top panel of the base of the device.
Step 13
- Next, remove the wires from the the small clips holding them in place.
Next, remove the wires from the the small clips holding them in place.
Step 14
- Lastly, remove the two screws holding the speaker in place.
- After doing that you will be able to just lift up on the speaker to remove it.
- Repeat Steps 8 and 9 for the other speaker.
Lastly, remove the two screws holding the speaker in place.
After doing that you will be able to just lift up on the speaker to remove it.
Repeat Steps 8 and 9 for the other speaker.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Jacob Volcke
Member since: 09/22/2022
665 Reputation
5 Guides authored
Badges:
4
+1 more badge
Team
University of North Texas, Team 4-2, Saru Jimmy Fall 2022
Member of University of North Texas, Team 4-2, Saru Jimmy Fall 2022
UNT-SARU JIMMY-F22S4G2
4 Members
5 Guides authored
