Toshiba Satellite P755 S5390 Touchpad Repair Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          10 - 20 minutes            

Sections

1

• Toshiba Satellite P755 S5390 Touchpad Repair
• 7 steps

Flags

2

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Missed a Step

Oops! This guide is currently missing some important steps.

• BackToshiba Satellite

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Toshiba Satellite P755 S5390 Touchpad Repair               

• Make sure that your laptop is powered off before continuing.
• Close the laptop lid and turn it over so that the spine is facing away from you.
• Slide the left slider, which is to the left the battery compartment, into its leftmost position.

Make sure that your laptop is powered off before continuing.

Close the laptop lid and turn it over so that the spine is facing away from you.

Slide the left slider, which is to the left the battery compartment, into its leftmost position.

1024

Step 2

• Slide and hold the right slider into its rightmost position.
• Lift the battery out of the compartment.

Slide and hold the right slider into its rightmost position.

Lift the battery out of the compartment.

Step 3

• Remove fifteen Phillips #1 screws from the back of the laptop.

Remove fifteen Phillips #1 screws from the back of the laptop.

Step 4

• Turn the laptop back over and open the lid.

Turn the laptop back over and open the lid.

Step 5

• Gently pry up the keyboard.
• Continue to pry off the rest of the keyboard.
• Don’t touch the motherboard.

Gently pry up the keyboard.

Continue to pry off the rest of the keyboard.

Don’t touch the motherboard.

Step 6

• Check if the touch pad cable is plugged into the ZIF connector on the motherboard.

Check if the touch pad cable is plugged into the ZIF connector on the motherboard.

Step 7

• Grab the blue plastic above the touch pad wire.
• While holding the blue plastic piece, firmly plug the cable into its socket on the motherboard.

Grab the blue plastic above the touch pad wire.

While holding the blue plastic piece, firmly plug the cable into its socket on the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Dominic Oldani                     

Member since: 03/19/2016

237 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Michigan Tech, Team 1-20, Lauer Spring 2016                        

                                                  Member of Michigan Tech, Team 1-20, Lauer Spring 2016 



                    MTU-LAUER-S16S1G20                     


                                            1 Member                     


                                            3 Guides authored