Toshiba Satellite P775 S7320 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

1

• Screen
• 6 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

• BackToshiba Satellite P775-S7320

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Screen               

• Begin by removing all of the screws around the perimeter of the screen. There are 6 total.

Begin by removing all of the screws around the perimeter of the screen. There are 6 total.

1024

Step 2

• Gently remove the plastic lining of the screen. Use a card, guitar pic, or another tool to pry open the lining, but be careful during this process.

Gently remove the plastic lining of the screen. Use a card, guitar pic, or another tool to pry open the lining, but be careful during this process.

Step 3

• Once the plastic lining is loose from the device, you can remove the lining. Gently pop the lining of the screen off of the hinges of the computer.

Once the plastic lining is loose from the device, you can remove the lining. Gently pop the lining of the screen off of the hinges of the computer.

Step 4

• Unscrew the screws located on the sides of the silver part of the screen. Some of the screws are smaller than others, so be sure to get all of them. The screen cannot come off if the screws are not all out.

Unscrew the screws located on the sides of the silver part of the screen. Some of the screws are smaller than others, so be sure to get all of them. The screen cannot come off if the screws are not all out.

Step 5

• At this point, your screen is almost disconnected. Be sure to support the screen because there is nothing holding it up.

At this point, your screen is almost disconnected. Be sure to support the screen because there is nothing holding it up.

Step 6

• Gently remove the tape from the screen. After you have done so, your screen is ready to be replaced!

Gently remove the tape from the screen. After you have done so, your screen is ready to be replaced!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Addie Reames                     

Member since: 10/10/2016

219 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Texas Tech, Team 6-5, Bennett Fall 2016                        

                                                  Member of Texas Tech, Team 6-5, Bennett Fall 2016 



                    TTU-BENNETT-F16S6G5                     


                                            4 Members                     


                                            3 Guides authored