Difficulty

Moderate

Steps

6

Time Required

                          15 minutes

Sections

1

  • Laptop Screen
  • 6 steps

Flags

5

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackToshiba Satellite P855-S5102

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Laptop Screen
  • Remove the two F3 screws on the bottom part of the screen.

Remove the two F3 screws on the bottom part of the screen.

1024

Step 2

  • Using a plastic opening tool, carefully pry open the border of the screen away from the screen until the border is completely off.

Using a plastic opening tool, carefully pry open the border of the screen away from the screen until the border is completely off.

Step 3

  • Using the Phillips 001, carefully remove each F3 screw on each corner of the screen.

Using the Phillips 001, carefully remove each F3 screw on each corner of the screen.

Step 4

  • Using the Phillips 012, remove the three F2 screws on each side of the screen.

Using the Phillips 012, remove the three F2 screws on each side of the screen.

Step 5

  • Carefully lift up the screen for an easier removal of the webcam. Then gently remove the connector by sliding it out of the webcam.

Carefully lift up the screen for an easier removal of the webcam. Then gently remove the connector by sliding it out of the webcam.

Step 6

  • Remove the tape holding the sliding connector and gently pull it out.

Remove the tape holding the sliding connector and gently pull it out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Rodrigo

Member since: 01/25/2018

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       1

Team

                       USF Tampa, Team S20-G3, Passmore Spring 2018                        

                                                  Member of USF Tampa, Team S20-G3, Passmore Spring 2018 



                    USFT-PASSMORE-S18S20G3                     


                                            4 Members                     


                                            7 Guides authored