Difficulty
Easy
Steps
6
Time Required
15 minutes
Sections
1
- Hard Drive
- 6 steps
Flags
0
BackToshiba Satellite Radius P55W-B5220
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive
- Turn off the laptop before starting
- Remove the two rubber feet closest to the hinge with a plastic opening tool
Turn off the laptop before starting
Remove the two rubber feet closest to the hinge with a plastic opening tool
1024
Step 2
- Remove the twelve M2x4mm PH0 Philips head screws.
Remove the twelve M2x4mm PH0 Philips head screws.
Step 3
- Loosen the back cover with a opening tool.
- The least damaging way to pry the cover is to start from corner and run the spudger along the edge.
- Do not crack or bend the cover.
Loosen the back cover with a opening tool.
The least damaging way to pry the cover is to start from corner and run the spudger along the edge.
Do not crack or bend the cover.
Step 4
- Carefully lift open the cover.
- Remove the attached purple ribbon cable underneath the cover.
- Do not rip the ribbon cable.
Carefully lift open the cover.
Remove the attached purple ribbon cable underneath the cover.
Do not rip the ribbon cable.
Step 5
- Gently lift up the hard drive
Gently lift up the hard drive
Step 6
- Gently lift up the black tab attached to the strip
- Do not rip the ribbon cable.
Gently lift up the black tab attached to the strip
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 2 other contributors
Ashley Egenti
Member since: 09/20/2017
242 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
University of North Texas, Team S5-G6, Thomas Fall 2017
Member of University of North Texas, Team S5-G6, Thomas Fall 2017
UNT-THOMAS-F17S5G6
5 Members
6 Guides authored
