Difficulty

Easy

Steps

3

Time Required

                          5 minutes            

Sections

1

  • Keyboard
  • 3 steps

Flags

0

  • BackToshiba Satellite S55t-A5389

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

If your keyboard as a whole is unresponsive or if a portion of the keyboard is cracked or damaged, you will need to replace it. If only certain keys are not working, it is more likely they there is something wrong with them than the keyboard as a whole.

What you need

Step 1

              Keyboard               
  • Flip laptop over so that the bottom is facing upwards.
  • Remove the two 5mm Phillips #0 screws from the bottom of the laptop.

Flip laptop over so that the bottom is facing upwards.

Remove the two 5mm Phillips #0 screws from the bottom of the laptop.

1024

Step 2

  • Flip the laptop over and open the display.
  • Insert a plastic opening tool into the gap found between the keyboard and top case.
  • Pry upwards until you hear a click and work your way around the perimeter of the keyboard.

Flip the laptop over and open the display.

Insert a plastic opening tool into the gap found between the keyboard and top case.

Pry upwards until you hear a click and work your way around the perimeter of the keyboard.

Step 3

  • Lift the keyboard up, but not all the way since there’s a ribbon cable attached underneath.
  • Underneath the keyboard is a ribbon cable that attaches it to the rest of the laptop.
  • Unlock the ribbon cable by lifting up the two small locks on both sides of the connector on the motherboard.
  • Once unlocked, remove the ribbon cable and keyboard from the laptop.

Lift the keyboard up, but not all the way since there’s a ribbon cable attached underneath.

Underneath the keyboard is a ribbon cable that attaches it to the rest of the laptop.

Unlock the ribbon cable by lifting up the two small locks on both sides of the connector on the motherboard.

Once unlocked, remove the ribbon cable and keyboard from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    William Mazanec                     

Member since: 01/29/2018

1,305 Reputation

                                      8 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       USF Tampa, Team S5-G6, Passmore Spring 2018                        

                                                  Member of USF Tampa, Team S5-G6, Passmore Spring 2018 



                    USFT-PASSMORE-S18S5G6                     


                                            3 Members                     


                                            8 Guides authored