Toshiba Satellite S55T B5335 Cooling Fans Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 minutes

Sections

Battery
2 steps
Bottom Cover
3 steps
Cooling Fans
3 steps

Flags

BackToshiba Satellite S55T-B5335
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Remove the two 7 mm Phillips #1 screws that hold the battery in place.

Remove the two 7 mm Phillips #1 screws that hold the battery in place.

1024

Step 2

Pull the battery from laptop.

Pull the battery from laptop.

Step 3

              Bottom Cover

Remove the ten 7 mm Phillips #1 screws that secure the back cover.

Remove the ten 7 mm Phillips #1 screws that secure the back cover.

Step 4

Wedge the tip of a plastic opening tool between the back cover and the metal frame.
Twist the plastic opening tool, while wedged, in order to release the retaining tabs from the frame.
Repeat these steps in a circular pattern around the laptop to release all retaining tabs.

Wedge the tip of a plastic opening tool between the back cover and the metal frame.

Twist the plastic opening tool, while wedged, in order to release the retaining tabs from the frame.

Repeat these steps in a circular pattern around the laptop to release all retaining tabs.

Step 5

Once all retaining tabs are released from the frame, you can pull up on the back cover to remove it.

Once all retaining tabs are released from the frame, you can pull up on the back cover to remove it.

Step 6

              Cooling Fans

Remove the two 3.5 mm Phillips #1 screws that hold the cooling fan in place.

Remove the two 3.5 mm Phillips #1 screws that hold the cooling fan in place.

Step 7

Wedge the flat end of the spudger between the connector and its socket.
Twist back and forth in order to pry the connector loose from its socket.
Although you can pull on the connector wires to remove it from the socket, it is not recommended until the connector is loose to prevent damage to the wires.

Wedge the flat end of the spudger between the connector and its socket.

Twist back and forth in order to pry the connector loose from its socket.

Although you can pull on the connector wires to remove it from the socket, it is not recommended until the connector is loose to prevent damage to the wires.

Step 8

Lift up on the cooling fan to remove it from the laptop.
Repeat steps 6-8 for the other cooling fan.

Lift up on the cooling fan to remove it from the laptop.

Repeat steps 6-8 for the other cooling fan.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    George Gillespie

Member since: 09/15/2016

721 Reputation

                                      7 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team 2-1, Blackwell Fall 2016                        

                                                  Member of USF Tampa, Team 2-1, Blackwell Fall 2016 



                    USFT-BLACKWELL-F16S2G1                     


                                            4 Members                     


                                            7 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team